QUICK RELEASE 1 3/4" OVERLINE TUBE COMP RAIL, TJ/LJ/YJ |
|
The Only Quick Release Jeep Body Armor!
Like running without flares? Add a comp rail for extra protection!
Easily release the two Ball Lock Joints with an allen wrench and two 18-8 Stainless Steel bolts.
Dynamic tension "pushes" the trail away.
The most tire clearance in the industry, covering 35s on a stock TJ! (see below for details)
Best object deflection angle and turning clearance in the industry! (see below for details)
|
 |
| |
| |
MOST TIRE CLEARANCE:
Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire.
And compared to other typical tube fenders, we can't be beat:
|
• 2.6" ABOVE tire vs. ALL other Tube Fenders
• 5" BEHIND tire vs. Typical Flat Fenders |
• 5.1" ABOVE tire vs. Stock Fenders
• 6.5" BEHIND tire vs. Stock Fenders |
|
 |
| |
|
STRENGTH & COVERAGE BY DESIGN:
|
Measuring 62" from edge to edge the Comp Rail minimal coverage that yields full protection.
|
Our signature Quick Release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt. |
|
 |
| |
|
A 7° Object Deflection Angle,
keeps the trail at bay. |
Built-in Deflection Gap provides dynamic resistance,
literally "pushing back" at the trail. |
 |
 |
| |
THE PROOF:
These diagrams silenced the critics and proved that MetalCloak truly is the best in the industry.
More details can be found in the Original Article..
|
MetalCloak with 4" Flare
vs. Typical Flat Tube Fender |
MetalCloak with 4" Flare
vs. Typical Flat Tube Fender with 3" Flare |
 |
 |
| |
SHIPPING & MATERIAL SPECIFICATIONS:
|
|
The Arched Flare Kit Includes:
Fenders (Driver & Passenger)
• 1/8" Cold Rolled Steel Plate
• 1 1/2" .120 Steel Tubing
Hardware
• 18-8 Stainless Steel |
INSTALLATION:
|
Installation is tremendously easy -- and we are not just saying that.
Read this article in Four Wheeler magazine that detailed how easy it was to install our Tube Fenders. |
| Installation Difficulty |
Easy - Bolt On |
| Time to Install |
5 Minutes (both sides) |
| Body Modification |
None |
| Tools Required |
Allen Wrench |
| Instructions |
View Here... |
|
|
TESTIMONIALS & BUZZ:
Check out what Jeepers everywhere are saying about our products on The Buzz Page. |
| |
|
OPTIONS: |
Raw Metal
|
Premium Black Textured Powdercoat |
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. General turn around time for a Raw Metal order is 5 - 7 days.
|
Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two weeks. Check out our video on how we powdercoat.
|
|
|
|
|
1 1/2 overline rub rails 
