2 5/8" OD x 2 5/8" W Duroflex Joint, 1 1/4" Angled Rod

MORE PRODUCT IMAGES:

Metalcloak Duroflex^TM Joints are another Game-Changing product from Metalcloak.

Our Patent Pending(#13/368,570) Joints provide

Vibration Dampening (the best ride quality)
Self-Centering
Minimum Wear of Bushing
34° of Misalignment per Joint
High Rotational Flex
Low Maintenance and Easily Rebuildable
Gold Zinc Plated for Protection Against the Elements

See below for more awesome details...

This kit is for (1) 2 5/8" OD x 2 5/8" W Duroflex Joint, 1 1/4" Angled Threaded Rod.

Duroflex joint is also available in other sizes and as builder kits.

$59.00

Availability: Usually Ships in 1 to 2 Weeks
Product Code: 7301

Features

Installation

WHY THE DUROFLEX JOINT?

Metalcloak has taken the best features of the most widely used control arm joints and combine those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint

Typical Flex Joint

Metalcloak Duroflex Joint

High Vibration Dampening
Self-Centering
Fused at Center Bushing
(No Bearing Surface Wear)

High Transverse Flex
High Rotational Flex
Rebuildable

High Vibration Dampening
Self-Centering
Fused Center Bushing
(No Bearing Surface Wear)
High Transverse Flex
High Rotational Flex
Rebuildable

THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

The best ride quality
No binding of your control arms.
None of the micro-wear that DESTROYS Flex Joints

High Misalignment...

By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...

Over 34 degrees of Misalignment
Over 68 degrees per Control Arm

Absorbs Micro-Movements...

Because the Roto-Bearing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...

Improved Ride Quality
None of the micro-wear that DESTROYS Flex Joints

True Bearing Surface...

The outer surface of the Roto-Bushing acts as a bearing, breaking free when called for, giving you...

Maximum Rotation & Articulation
No "Binding Up" of the Control Arms

Low Maintenance & Rebuildable...

Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others...

But, when you do need to rebuild it, it is Metalcloak Easy!

Just pull out the Roto-Bushing, clean it up, add some new Teflon impregnated, synthetic silicone grease. Reassemble.

Done.

DEGREES OF ARTICULATION...

Metalcloak's Duroflex Joint provides 28˚ more articulation and flex then typical control arms!

INSTALLATION:

Installation is as easy as it can get. The precision manufacture of the joint allows for simple bolt-in with no struggling to make the control arms fit.

Installation Difficulty	Easy-Bolt On
Time to Install	5 min
Body Modification	None
Tools Required	Wrench Set
Instructions	View Here...

TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.

Share your knowledge of this product with other customers... Be the first to write a review