Adjustable Bump-Stop System (1"

Adjustable Bump-Stop System (1" - 4")

MORE PRODUCT IMAGES:

The Metalcloak Adjustable Bump-Stop System provides...

Stackable Individual Pads
Easy Height Adjustment for 1", 2", 3", or 4"
Hard Vulcanized Rubber (90 durometer) Material
No Need to Remove Coils for Adjustment (after install)

Complete Adjustable Bump-Stop Kit Includes:

(8) One Inch Rubber Vulcanized Sectional Pads
(2) Gold Zinc Plated Steel Impact Caps
Black Oxide Bolts In Required Lengths for all Heights

$69.00

Availability: Usually Ships in 24 Hours
Product Code: 7040

Features

Installation

Metalcloak Adjustable Bump Stop System...

Adjust from 1" - 4" Without Removing Coils
Perfect Height Regardless of Tire Size
Vulcanized Rubber Dampens Impact
Additional Pads Available on Request

Get Correct Bump-Stop Height Every Time!

4" - Use all 4 sections and longest hardware bolts for maximum bump-stop height
3" - Use all 3 sections and long hardware bolts for maximum bump-stop height
2" - Two sections and medium hardware bolts are used for medium bump-stop height
1" - One section and the short hardware bolts are used for the minimum bump-stop height

DIMENSIONAL SPECIFICATIONS:

Standard Tube FEnder Clearance

BUMP STOP SIZING RECOMMENDATIONS:

2007+ Jeep Wrangler JK with Recommended Metalcloak 6-Pak Shocks
	Tire Size
	31"	33"	35"	37"	40"
MetalCloak High Clearance Overline Fenders	0	1"	2"	3"	4"
Stock Fenders (not trimmed)	4"	4"	NR	NR	NR
Generic Aftermarket Fenders (Poison Spyder, Xenon, Bushwacker)	2"	3"	4"	4"	NR

NR = Not Recommended

SHIPPING & MATERIAL SPECIFICATIONS:

Standard Tube FEnder Clearance

The Adjustable Bump-Stop System Includes:

• (2) Gold Zinc Plated Impact Cap (Driver & Passenger)
• (8) 1" Vulcanized Rubber Pads

Hardware
• 2 Extra Long Black Oxide bolts
• 2 Long Black Oxide bolts
• 2 Medium Black Oxide bolts
• 2 Short Black Oxide bolts
• 2 Clear Zinc plated nylock nuts

INSTALLATION:

Installation requires some drilling and removal of your coil springs.

Once installed, adjustment does not require removal of springs.

Installation Difficulty	Moderate-Requires some Drilling
Time to Install	1 - 2 hours
Body Modification	None
Tools Required	Ratchet Set Wrench Set Allen Wrenches Drill (1/2" - 9/16" )
Instructions	View Here...

TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.

Share your knowledge of this product with other customers... Be the first to write a review