MetalCloak "Big Bolt" TJ/LJ/XJ Upper Front Duroflex Control Arms
MetalCloak "Big Bolt" TJ/LJ/XJ Upper Front Duroflex Control Arms


 
The MetalCloak "Big Bolt" TJ/LJ/XJ Upper Front Duroflex Control Arms are precision engineered for all the flex, the smoothest ride, and have been designed for use with the included larger 1/2in hardware at the frame side.

Equipped with the MetalCloak Duroflex™ (Patent-Pending) self-centering composite bushing. These "Large Bolt" control arms have a larger diameter hole at the frame bracket side to allow for the bigger 1/2in bolt for added strength.

All parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements.

Note: Factory bracket must be drilled out to fit larger diameter bolt. MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once MetalCloak Suspension is Installed.

: $185.00

Availability: Now Shipping in 5 - 7 Days
Product Code: 7071


 
Features Specifications & Materials Installation Instructions
 

OEM Clevite and Typical Flex Joint is the Duroflex Joint

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

Duroflex 101 Video
OEM Clevite and Typical Flex Joint is the Duroflex Joint

Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR...

A: You'd have the key to the MetalCloak Control Arms, the Duroflex Joint (Patent Pending)

Standard Tube FEnder Clearance

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint Typical Flex Joint MetalCloak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
OEM Clevite and Typical Flex Joint is the Duroflex JointTHE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

  • The best ride quality
  • No binding of your control arms.
  • None of the micro-wear that DESTROYS Flex Joints

Standard Tube FEnder Clearance
Standard Tube FEnder Clearance

High Misalignment...

By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...

  • Over 34° of Misalignment
  • Over 68° per Control Arm

Absorbs Micro-Movements...

Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...

  • Improved Ride Quality
  • None of the micro-wear that DESTROYS Flex Joints
Standard Tube FEnder Clearance
Standard Tube FEnder Clearance

True Bearing Surface...

The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...

  • Maximum Rotation & Articulation
  • No "Binding Up" of the Control Arms

Low Maintenance & Rebuildable...

Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others...

But, when you do need to rebuild it, it is MetalCloak Easy!

Just pull out the Duroflex Bushing, clean it up, add some new Teflon impregnated, synthetic silicone grease. Reassemble.

Done.

Standard Tube FEnder Clearance
OEM Clevite and Typical Flex Joint is the Duroflex Joint

DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms!

Standard Tube FEnder Clearance Standard Tube FEnder Clearance
OEM Clevite and Typical Flex Joint is the Duroflex Joint

CONTROL ARM SPECIFICATIONS:

OEM Clevite and Typical Flex Joint is the Duroflex Joint

Note: These Control Arm Specifications are Just Starting Points. ALL JEEPS ARE DIFFERENT. MetalCloak Recommends Seeing a Suspension Specialist for Correct Control Arm Lengths For YOUR Jeep.

TJ Wrangler Upper Front

  • CNC Formed
  • 3/16" Wall DOM Steel
  • 1.25" OD
  • Precision Locking Nut
  • Gold Zinc Plate
  • Duroflex Joint at Both Ends
TJ Control Arm Specs
OEM Clevite and Typical Flex Joint is the Duroflex Joint

TESTIMONIALS & BUZZ:


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Customers who bought this were also interested in...
TJ Front 3.5in True Dual Rate Coils TJ Rear 3.5in True Dual Rate Coils TJ Lower Front or Rear Control Arms

TJ Upper Rear Control Arms

OEM Clevite and Typical Flex Joint is the Duroflex Joint


Share your knowledge of this product with other customers... Be the first to write a review