Metalcloak Chromoly Dog-Legged Tie Rod, JK Wrangler
Metalcloak Chromoly Dog-Legged Tie Rod, JK Wrangler


 
The MetalCloak Chromoly Dog-Legged Tie Rod for the JK Wrangler is manufactured from Normalized 1.375" OD .375" Wall ID 4130 CDS Chromoly Tubing and finished with Gold Zinc Plate for durable trail-proven strength.

**WORKS WITH STOCK WHEEL BACKSPACING!**

Exclusive to MetalCloak this tie rod comes with dual 1-ton forged and heat treated 1" Dog-Leg Rod-Ends that have strength AND provides clearance for use with stock or aftermarket wheels -- allowing the best turning radius possible.

The MetalCloak Chromoly Dog-Legged Tie Rod comes complete with a heavy duty adjustable steering stabilizer mount bracket for aftermarket steering stabilizers and installs into the factory location.
  • Tubular 1.375”OD .375” wall ID 4130 Chromoly CDS
  • 1-Ton Forged Heat Treated Off Set Dog Leg Rod Ends
  • OE Taper Pin for Exact Fitment
  • Design Limits Misalignment to Control Tie Rod Flop
  • Sealed with Durable Rubber Grease Boots
  • Gold Zinc Chromate Finish
  • Adjustable While Installed
  • Includes Steering Stabilizer Bracket
Important Note: Steering stabilizer bracket requires use of aftermarket steering stabilizer.

: $349.00

Availability: Now Shipping in 5 - 7 Days
Product Code: 7222


 
Features Specifications & Materials Installation Instructions
 
OEM Clevite and Typical Flex Joint is the Duroflex Joint
CHROMOLY (COLD DRAWN SEAMLESS) STEEL FOR ADDED STRENGTH
Making a Tie Rod is easy, but we don't do easy; we chose Normalized 4130 Chromoly 1.375”OD .375” wall tube that can take a beating without breaking (97,200 pound per square inch).

JK Wrangler Dog Leg Tie Rod

OEM Clevite and Typical Flex Joint is the Duroflex Joint
DOG LEG TIE ROD ENDS
!WORKS WITH STOCK BACKSPACING!

Boot Sealed - Keeps grease in and dirt out

Anti Flop Feature - Precision range of movement

Maximum Tire/Wheel Clearance - Correct steering radius

Massive 1-Ton Rod Ends - Provides additional strength

Over-sized 1 inch threads- More material at critical area

JK Specific OE Bolt Taper - Secure mount

Over-Sized, Forged, & Heat Treated Housing - Exclusive
Anti Flop
OEM Clevite and Typical Flex Joint is the Duroflex Joint
ANTI FLOP FEATURE

Anti Flop

This specially designed rod end has been engineered just for the JK Wrangler steering.

Full side to side range of motion ensures bind free steering when pushing the extremes of your Jeeps travel and articulation, while a limited "front to back" range of movement is built into the rod-end and eliminates the possibility of the offset to allow the tie-rod to "flop".
OEM Clevite and Typical Flex Joint is the Duroflex Joint
STEERING STABLIZER TIE ROD MOUNT
Steering Stablizer Tie Rod Mount
  • CAD Formed 7GA Hot Rolled Steel
  • Easy Bolt-On Bracket (No Welding)
  • Zinc Chromate Plate
The MetalCloak Steering Stablizer Tie Rod Mount will work with the Stock Tie Rod but was designed for the MetalCloak JK Wrangler Tie Rod.
Anti Flop
OEM Clevite and Typical Flex Joint is the Duroflex Joint
TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
OEM Clevite and Typical Flex Joint is the Duroflex Joint

Share your knowledge of this product with other customers... Be the first to write a review