JK Replacement Aluminum Inner Fender Set
JK Replacement Fender Well


 
The JK Wrangler Replacement Aluminum Inner Fender Well is the original Aluminum Inner Fender Well system for JK Wranglers.

Protect your engine bay where necessary, eliminate coverage where its not, and bring engine temp down by as much as 30 degrees!

Designed to work specifically with MetalCloak JK and JK Unlimited Fenders the inner fender system can be used without our fenders, but it will take additional drilling and modification to install. If you are not sure of the fitment, talk to a MetalCloak representative before purchasing.

Easy to install Inner Fender Well kit includes:
  • 3 Part Driver & Passenger Fenders
  • 18-8 SS bolts
Note: This product is designed for MetalCloak fenders only. You may buy it and try to modify it for other types of fenders, but there is no guarantee that it will work. Here is a thread that details installation on a non-MC fender.

: $179.00

Availability: Now Shipping in 5 - 7 Days
Product Code: 3290

Choose Your Finish

Finish*:
Raw Metal
Black Powder Coat (3290 BPC) [Add $99.00]

 
Features Specifications & Materials Installation Instructions
 
Dividing Line

JK ALUMINUM REPLACEMENT INNER FENDER WELL

Give Your JK Fenders that "Finished" Touch.

Keeping with the tradition of Aluminum Fender wells, MetalCloak offers a three-part Replacement Aluminum Fender well system.

  • Easily installs.
  • Adds clearance.
  • Provides venting for engine area - temp lowers by as much as 30 degrees!

NOTE: You can also reuse the stock plastic inner fender wells. These Aluminum Fender Wells are an option, not a necessity.

The Inner Fenders were designed for use with MetaCloak Fenders, but can be mounted with Non-MetalCloak fenders, though it will require creativity on your part. Here is a thread that describes the install on JKOwners.com

JK Tube Fenders
Dividing Line

TESTIMONIALS & BUZZ:


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
OPTIONS:
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation Black Powdercoat Video
Dividing Line
Customers who bought this were also interested in...
Overline Front Femders Overland Front Fenders fRONT Flares

Center Seat Support

OEM Clevite and Typical Flex Joint is the Duroflex Joint


Average Customer Review: 4.5 of 5 Total Reviews: 64 Write a review.

  0 of 0 people found the following review helpful:
 
Pleased with inner fenders December 21, 2016
Reviewer: M Tracy from Orlando, FL United States  
Nicely machined and a perfect fit.  If i had to nit pick I wish that the edges had been quickly hit with sandpaper as I found them sharp and a little rough hence my deduction of a star.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Top quality December 21, 2016
Reviewer: Edmond Keshishyan from GLENDALE, CA United States  
I like this product.  It was easy to install and looks great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
OK inner fenders. November 14, 2016
Reviewer: Clark Hill from Boise, ID United States  
I have had the opportunity to install several different inner fenders over the last few months with the MetalCloak on my personal JK.  Install was ok, took some work to get them to not rattle but at full flex my tires rub above the spring.  

I would highly considers others no matter what fender you run.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Horrible fit October 3, 2016
Reviewer: Fred Schramm from Tehachapi, CA United States  
Lots of grinding, sanding and bending to get them to fit. Had to slot the bracket on the passenger side that holds two major connectors to the wiring harness. The relief cut sits on the harness, had to cut some rubber tubing to keep it from chaffing through the harness. They rattle a lot!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Soooo much easier September 20, 2016
Reviewer: Reggie Allen from WEST LINN, OR United States  
Originally I was going to use the stock liners with my new overland flares but after cutting once, cutting twice, and yep, it's still to short, I finally ordered these things up. Soooo much faster and easier.

Was this review helpful to you?

View All Customer Reviews