JK Rear Coil Spring Retainer
JK Rear Coil Spring Retainer

The MetalCloak JK Rear Coil Spring Retainer assures the rear coil stays in place.

This simple retainer solution keeps the rear coil secure and ensures that it remains where it needs to be.

Why do you need it?

While MetalCloak's True Dual Rate Coils ensures the spring stays in contact at full droop, not all coils are made the same. If you have another aftermarket coil or if you custom set up depends on limiting straps or uses the shock as a limiting strap, it is possible for the coil to fall out if one of them breaks unexpectedly. The spring retainer is just one more option to make sure you are prepared for anything.

Complete Rear Coil Spring Retainer Kit Includes:
  • (2) Laser Cut Gold Zinc Plated Steel Retainer Rings
  • (2) Gold Zinc Plated Grade 8 bolts
  • (2) Spring Retainer Flag nuts
  • (2) Black Zinc Plated Lock Washers

: $24.00

Availability: Usually Ships in 1 to 2 Weeks
Product Code: 7182

Features Specifications & Materials Installation Instructions
Dividing Line
  • Easy Installation
  • Ensures Coil Spring Can Not Fall Out
  • 1/4 Thick Steel
  • Gold Zinc Plated Finish
Added safety...

Don't take a chance on your coil spring falling out at extremes of articulation or rattling in the bucket. Get MetalCloaks Coil Spring Retainers for absolute assurance your springs stay in place.
Dividing Line

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Customers who bought this were also interested in...
JK 4 Door 3.5in True Dual Rate Coils JK Replacement Brake Lines Front Shock Extension Kit

JKRear Stock Brake Line Relocation Kit

Dividing Line

Average Customer Review: 5 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
December 29, 2017
Reviewer: Rafael Rexach( Rex) from Dover, FL United States  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Keeps em in place September 27, 2017
Reviewer: SCOTT EVANS from Bennington, NE United States  
Install was easy.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Springs Retained May 5, 2017
Reviewer: Richard May from Indianapolis, IN United States  
Not much to say, I managed to get them bolted in.
There is not very much room for your fingers under the spring perch. The tabs on the nuts, could be a little longer with a couple of bends, to make it slightly easier to get nut under the bolt. I had to hang onto the tabs on the nuts, with just the tips of my fingers, to position the nut under the bolt hole. A little frustrating, but doable.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Must have March 29, 2017
Reviewer: Charley Cross from Berthoud, CO United States  
These are a must have if you don't have limit straps and tons of travel. These, just like everything Metalcloak makes is awesome!

Was this review helpful to you?