4" Overline Tube Flare, Pair, CJ-5 & CJ-7
Jeep CJ 4" Overline Front Flare

The 4" CJ Overline Tube Fender Flare gives you maximum tire clearance with that traditional "flat fender" appeal.

Quick Release Ball Lock Joints secure each end of the Flare for incredible strength while providing the best turning clearance, best object deflection angle and best tire clearance in the industry.
  • 2.6" ABOVE Tire vs. Typical Tube Fenders
  • 5" BEHIND Tire vs. Typical Tube Fender
  • 5.1" ABOVE Tire vs. Stock Fender Flares
  • 6.5" BEHIND Tire vs. Stock Fender Flares
Easy to install Overline Tube Flare kit includes:
  • Driver & Passenger 4" Tube Flares
  • Two 18-8 SS bolts
4" or 6" versions are available.
: $199.00

Availability: Raw Metal Usually Ships in 1 to 2 Weeks
Product Code: 2242

Choose Your Finish

Raw Metal
Black Powder Coat (2242 BPC) [Add $89.00]

Features Specifications & Materials Installation Instructions
Dividing Line

The Only Quick Release Jeep Flare!

Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.

Easily release the two Ball Lock Joints with an allen wrench and two 18-8 Stainless Steel bolts.

The most tire clearance in the industry, covering 35s on a CJ with a 2" BL! (see below for details)

Best object deflection angle and turning clearance in the industry! (see below for details)

Gain 14" of Articulation as seen in Four Wheeler magazine!

Overline Tube Fender on TJ

Dividing Line


Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire.
And compared to other typical tube fenders, we can't be beat:

2.6" ABOVE tire vs. ALL other Tube Fenders
5" BEHIND tire vs. Typical Flat Fenders

5.1" ABOVE tire vs. Stock Fenders
6.5" BEHIND tire vs. Stock Fenders

Standard Tube Fender vs MetalCloak

Stock Jeep Tube Fender

Dividing Line


The 4" flare is approximately "stock" in coverage.

Our signature Quick Release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt.

Tube Fender Clearance

Mounting Tube Fender

Dividing Line


A 12 Object Deflection Angle, no other tube flare comes close.

Coverage where it counts,
Turning Clearance where it's critical.
Object Deflection Clearance Tube Fender Turning Clearance

Dividing Line


These diagrams silenced the critics and proved that MetalCloak truly is the best in the industry.
More details can be found in the Original Article.

MetalCloak with 4" Flare
vs. Typical Flat Tube Fender

MetalCloak with 4" Flare
vs. Typical Flat Tube Fender with 3" Flare
MetalCloak vs GenRight MetalCloak vs Poison Spyder

Dividing Line


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation
Dividing Line
Customers who bought this were also interested in...
8in Overline Front Flare 8in Overline Front Flare 6in Arched Front Flare 6in Arched Front Flare

Dividing Line

Average Customer Review: 5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
Great design April 4, 2018
Reviewer: Justin Kane from Brentwood, TN United States  
I was impressed by how sleek the fender flares look and also the quality seems top notch.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Wow December 4, 2016
Reviewer: Grant Richardson from Murrells Inlet, SC United States  
Once again Metalcloak does what the competitor can't. Produce a product that not only could survive the battlefield but then take you to the front of the show class as well. The 4" flares on my CJ7 look amazing. This full armour kit looks insane without the flares but WOW so glad I purchased. Nicest jeep in the SC!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 inch over line flairs December 27, 2013
Reviewer: Robert Lawyer from Big bear city, CA United States  
These flairs look great and are stout!

Was this review helpful to you?