Rear Flare Mounting Plate, Pair, YJ Mod Cut
Cut-Out Jeep Rear Flare Mounting Base Plate, YJ/CJ

The Jeep Wrangler YJ Rear Flare Mounting Base Plates, Mod Cut, install easily with only minor Body Modification, and provide additional strength to the vulnerable wheel well opening allowing bigger tires on a lower lift.

Designed specifically as a mounting system for our Rub Rail, 4" or 6" Quick Release rear flares, the flare mounting hardware is built right in.
    The Rear Flare Base Plate kit includes:
    • Driver & Passenger 1/8" Base Plates
    • 18-8 SS Hardware Kit
    • Aluminum Flare Mounting Brackets
    : $139.00

    Availability: Raw Metal Currently Shipping in 2 - 3 Weeks
    Product Code: 2413

    Choose Your Finish

    Raw Metal
    Premium Black Texture Powder Coat (2413) [Add $49.00]

    Features Installation Instructions

    Rear Flare Mounting Plates, designed to mount the Quick Release Flares and cut for bigger tires.

    1/8" Cold Rolled Steel Plate creates a solid mounting point for your Quick Release Flares.

    Adds additional strength to your wheel well.

    Quick Release flares available in Rub Rail, 4" or 6".

    Mod Cut wheel opening allows for up to 33's comfortably on a stock YJ or CJ with no rubbing or 35's on a 2" BL. (see below for details)

    Fully integrates with the MetalCloak body armor system.

    Jeep Corner Guards


    Mod Cut requires a small cut of the tube from behind and in front of the tire.

    Body Mod Base Plate trumps the Stock Plastic Flares.

    Small Body Mod Rear Fenders

     Rear Fender Clearance


    The Base Plate integrates with our Rocker Rail creating one solid unit of protection.

    Mod-Cut Mounting Plate allows for plenty of room for 35s on YJ with a 2" body lift.

    Jeep Rear Tube Fender

    Jeep Rear Tube Fender

    Shipping MetalCloak Fenders

    The Corner Guards Include:

    Corner Guards (Driver & Passenger)
    1/8" Cold Rolled Steel Plate
    Integrated Flare Mounting System

    18-8 Stainless Steel Hardware Kit
    Aluminum Flare Mounting Brackets


    We strive to make all our products easy to install.

    The Mod-Cut rear fender mounting plates require some drilling and body cutting, otherwise they install very smoothly and easily with no welding required.

    Installation Difficulty Modertate - Requires cutting of body.
    Time to Install 2 - 2.5 hours (Both Sides)
    Body Modification Some Drilling & Cutting
    Tools Required

    See Instructions

    Instructions View Here...


    Check out what Jeepers everywhere are saying about our products on The Buzz Page.


    Raw Metal

    Premium Black Textured Powdercoat

    If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. General turn around time for a Raw Metal order is 5 - 7 days.

    Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two weeks. Check out our video on how we powdercoat.

    Tube Fender Preparation

    Frame-Built Bumpers
    Garage Sale

    Average Customer Review: 5 of 5 | Total Reviews: 6 Write a review.

      0 of 0 people found the following review helpful:
    rear flare mointing plate. May 23, 2013
    Reviewer: Single Stack from Mount Pleasant, MI United States  
    Easy way to mount flares,  simple bolt on construction. Holds flares securely.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    A+ February 6, 2013
    Reviewer: Miguel Sanchez Barajas from hawthorne , CA United States  
    Great idea to offer the MOD cut version. It really gives my jeep room for the 35" tires with a litle less than 4" lift.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    Can't wait for my flares.... November 18, 2012
    Reviewer: John Marotta from Bayville, NJ United States  
    Definitely do the mod cut.. Was some work but made some nice room for my 35's.  ordered them raw with intention of painting them the body color but decided to paint them black to match the powder coated flares. Great quality..

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    Great. March 22, 2012
    Reviewer: Mark St. Peter from Victorville, CA United States  
    These were easy to install and easy to modify for the rear rear opening of the wheel wells.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    MOD CUT YJ FLARE MOUNTS July 13, 2011
    Reviewer: Servando Miramontes from Vallejo, CA United States  
    Incredible quality in product and customer service! Flare Mounts shipped fast and I was able to install them in about 2hrs! Anyone on the fence on whether they should get the Mod Cut or the Stock Cut should really decide on the Mod Cut.... Very little is trimmed and it makes a world of difference! You can mess up the trimming either since you trace the outline of the newly installed fender mount!

    All in all I feel Metalcloak's products are the best in the market.... And their customer service and follow up is what brings people back!


    Was this review helpful to you?

    View All Customer Reviews