Overland Tube Fenders, JK Wrangler, Front
Jeep Wrangler JK Overland Tube Fender

The JK Wrangler Overland Tube Fender provides MetalCloak Craftsmanship & Fitment without the extreme clearance and strength of our Overlines.
  • Easy to Install
  • One Piece - No Additional Flare to Buy
  • Optional Reinforcement Brackets
  • Optional Aluminum Inner Fender Well
  • Signature Precision Fit Technology
Complete Stock Replacement Fender Kit Includes:
  • Driver & Passenger Fenders
  • All Installation Hardware and Brackets
"Aluminum Inner Fender Liners & LED Marker Lights are not included"
Click here to add fender liners to your order now.

Click here to add LED Marker Lights to your order now.

Note: This system comes in Raw and MetalCloak's Signature Black Powdercoat.

: $499.00

Availability: Raw Metal Usually Ships in 1 to 2 Weeks
Product Code: 3200

Choose Your Finish

Raw Metal
Black Powder Coat (3200-BPC) [Add $129.00]
Black Powder Coat-Fender/Bracket [Add $168.00]

Features Specifications & Materials Installation Instructions

Dividing Line

Don't Need Extreme? Go Overland!

Our JK Overline Tube Fenders are famous for their strength and having the most clearance in the industry.

But for some, the Overlines are simply a little too extreme.

Now, you have a choice.

Introducing the OverLAND's from MetalCloak.

  • Easier to Install
  • Same Quality Craftsmanship
  • Precision Fit
  • Strength for the Trail
  • One Piece Solution
Overline on TJ
Dividing Line


The JK Body is notoriously weak. Therefore fender manufacturers must be careful in developing products ensuring they fit precisely and put no undue stress on the vehicle. Unfortunately, many of the JK Fender Manufacturers have ignored this. Below is a comparison of the typical aftermarket JK Tube Fender from a well known leading manufacturer and the new MetalCloak Overlands.

Overline on TJ

Overline on TJ

Dividing Line


Measuring 75 3/4" from edge to edge the 8" has more coverage behind the tire then our Overline Fenders.
Each fender is precision fit and hand welded to ensure there are no fitment issues.

The front Overland Fenders have the same exclusive bracketing as our Overlines.

Overline on TJ Tube Fender
OEM Clevite and Typical Flex Joint is the Duroflex Joint
MetalCloak's Fenders are about clean lines and great fitment; it continues down to the last details.

Attachment points for our Low Profile LED Marker Lights are seamlessly integrated into the fender and out of harm's way, perfectly complimenting the styling with purpose and safety.

Tube Fender
Dividing Line


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation Black Powdercoat Video
Dividing Line
Customers who bought this were also interested in...
Overland Rear Flares TJ Low Profile LED Marker Lights 4 Inch Arch Flare

GCD Flasher

OEM Clevite and Typical Flex Joint is the Duroflex Joint

Average Customer Review: 5 of 5 Total Reviews: 20 Write a review.

  0 of 1 people found the following review helpful:
EFFINAWESOME January 29, 2017
Reviewer: Don Boyles from Lewiston, ID United States  
I put a 2.5" lift and a set of 35" tires on my 2013 JKU Rubicon. The stock rear fenders would just BARELY rub so I decided to put these babies on. Once I started removing the stock ones, I realized what a dumb setup that was. The Overland Tube Fenders (front and rear) fit easy and look great. Get the inner fenders, also.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Awesome August 8, 2016
Reviewer: Lee Anthony from Ocala, FL United States  
The overland fenders truly have pushed my JKU over the top. well made and the fit is great

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Overland August 6, 2016
Reviewer: Dennis Ruse from Frankfort, IN United States  
Build quality is great, just having hard time finding a tap to clean out threads in one of the ball ends, cant get the stainless bolt in. Other than that love the quality and look on the jeep....

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Metalcloak overland fenders July 18, 2016
Reviewer: Jay Riffel from Lake Mary, FL United States  
Best customer service I ever had. I messed up my order and scheuled pickup. Picked up phone and called Metalcloak, not only they answered wuickly but they rushed my order to get it out the same day. Will use again and will recommend to all my friends.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
New fenders May 28, 2016
Reviewer: Howard W Mobus Jr from Rockvale, TN United States  
My experience has been great. From the first contact to the end result.  The time your sales manager took to make shore what I needed was right. Thanks very much

Was this review helpful to you?

View All Customer Reviews