"OVERLINE" FLAT JEEP TUBE FENDERS, TJ/LJ Patent Pending |
|
Most Tire Clearance in the Jeep Industry.
(see below for details)
Gain 14" of Articulation as seen in Four Wheeler magazine!
True Low Center of Gravity Builds - Play around with 35s on a Stock TJ or Krawl Hard with 37s on a 3" lift!
Gain Highline Kit clearance without Hacking or Replacing your Hood. No hacking your Stock Fenders like other tube fenders require. Set them aside or resell them!
Uses Stock Battery & Air Box! No need to buy a replacement battery or air box like other companies require. |
 |
| |
| |
MOST TIRE CLEARANCE:
Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire.
And compared to other typical tube fenders, we can't be beat:
|
• 2" ABOVE tire vs. ALL other Tube Fenders
• 5" BEHIND tire vs. Typical Flat Fenders |
• 4.5" ABOVE tire vs. Stock Fenders
• 6.5" BEHIND tire vs. Stock Fenders
|
|
 |
| |
|
MOST TURNING CLEARANCE:
By giving you a replacment battery tray MetalCloak gives you more room behind the tire,
so unlike typical tube fenders, you don't rub on a simple turn.
|
|
|
| |
THE PROOF:
These diagrams silenced the critics and proved that MetalCloak truly was the best in the industry.
Here they are shown with the Arched Tube Fender, but the results are similar for the Overline.
More details can be found in the Original Article..
|
MetalCloak with 4" Flare
vs. Typical Flat Tube Fender |
MetalCloak with 4" Flare
vs. Typical Flat Tube Fender with 3" Flare |
 |
 |
| |
SHIPPING & MATERIAL SPECIFICATIONS:
|
|
The Overline Fender Kit Includes:
Fenders (Driver & Passenger)
• 1/8" Cold Rolled Steel Plate
• 1 1/2" .120 Steel Tubing
Inner Fender Wells & Access Panels (D & P)
• 1/16" Aluminum Plate
Replacement Battery Trays (D & P)
• 1/8" Cold Rolled Steel Plate
Hardware
• Stainless Steel 18/8
|
INSTALLATION:
|
Installation is tremendously easy -- and we are not just saying that.
Read this article in Four Wheeler magazine that detailed how easy it was to install the Overline Tube Fenders.
Since MetalCloak fenders fit all your stock equipment, there is no need to buy an aftermarket air box or batteries like like others in the industry require. |
| Installation Difficulty |
Easy - Bolt On |
| Time to Install |
4 - 6 hours |
| Body Modification |
None |
| Tools Required |
Rachet Set
Wrench Set
Allen Wrenches |
| Instructions |
Download |
|
|
TESTIMONIALS & BUZZ:
Check out what Jeepers everywhere are saying about our products on The Buzz Page. |
| |
|
OPTIONS: |
Raw Metal
|
Premium Black Textured Powdercoat |
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. General turn around time for a Raw Metal order is 5 - 7 days.
|
Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two weeks. Check out our video on how we powdercoat.
|
|
|
|
|
