QUICK RELEASE 4" ARCHED TUBE FLARE, TJ/LJ/YJ |
|
The Only Quick Release Jeep Flare!
Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.
Easily release the two Ball Lock Joints with an allen wrench and two 18-8 Stainless Steel bolts.
The most tire clearance in the industry, covering 35s on a stock TJ! (see below for details)
Best object deflection angle and turning clearance in the industry! (see below for details) Gain 14" of Articulation as seen in Four Wheeler magazine!
|
 |
| |
| |
MOST TIRE CLEARANCE:
Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire.
And compared to other typical tube fenders, we can't be beat:
|
• 2.6" ABOVE tire vs. ALL other Tube Fenders
• 5" BEHIND tire vs. Typical Flat Fenders |
• 5.1" ABOVE tire vs. Stock Fenders
• 6.5" BEHIND tire vs. Stock Fenders |
|
 |
| |
|
STRENGTH & COVERAGE BY DESIGN:
|
Measuring 67.25" from edge to edge the 4" flare is equivalent to the stock flare coverage.
|
Our signature Quick Release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt. |
|
 |
| |
OBJECT DEFLECTION & TURNING CLEARANCE
|
A 16° Object Deflection Angle, the best in the industry. |
Coverage where it counts, Turning Clearance where it's critical. |
 |
 |
| |
THE PROOF:
These diagrams silenced the critics and proved that MetalCloak truly is the best in the industry.
More details can be found in the Original Article..
|
MetalCloak with 4" Flare
vs. Typical Flat Tube Fender |
MetalCloak with 4" Flare
vs. Typical Flat Tube Fender with 3" Flare |
 |
 |
| |
SHIPPING & MATERIAL SPECIFICATIONS:
|
|
The Arched Flare Kit Includes:
Fenders (Driver & Passenger)
• 1/8" Cold Rolled Steel Plate
• 1 1/2" .120 Steel Tubing
Hardware
• 18-8 Stainless Steel |
INSTALLATION:
|
Installation is tremendously easy -- and we are not just saying that.
Read this article in Four Wheeler magazine that detailed how easy it was to install our Tube Fenders. |
| Installation Difficulty |
Easy - Bolt On |
| Time to Install |
5 Minutes (both sides) |
| Body Modification |
None |
| Tools Required |
Allen Wrench |
| Instructions |
Download |
|
|
TESTIMONIALS & BUZZ:
Check out what Jeepers everywhere are saying about our products on The Buzz Page. |
| |
|
OPTIONS: |
Raw Metal
|
Premium Black Textured Powdercoat |
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. General turn around time for a Raw Metal order is 5 - 7 days.
|
Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two weeks. Check out our video on how we powdercoat.
|
|
|
|
|
