6" Arched Front Flare, Pair, TJ/LJ/YJ
Jeep Wrangler TJ/LJ/YJ 6" Arched Front Flare


 
The MetalCloak 6" TJ/LJ/YJ Arched Tube Fender Flare is the only Quick Release Jeep Flare in the industry.

Ball Lock Joints secure each end of the Flare for incredible strength while providing the best turning clearance, best object deflection angle and best tire clearance in the industry.
  • 2.6" ABOVE Tire vs. Typical Tube Fenders
  • 5" BEHIND Tire vs. Typical Tube Fender
  • 5.1" ABOVE Tire vs. Stock Fender Flares
  • 6.5" BEHIND Tire vs. Stock Fender Flares
Easy to install Arched Tube Flare kit includes:
  • Driver & Passenger 6" Tube Flares
  • Two 18-8 SS bolts
Note: Comp Rail or 4" versions are available.

Note: You MUST have MetalCloak Arched Tube Fenders to mount this flare. The flare only mounts on the MetalCloak Arched Tube Fender.

: $229.00

Availability: Raw Metal Usually Ships in 1 to 2 Weeks
Product Code: 2260

Choose Your Finish

Finish*:
Raw Metal
Black Powder Coat (2260 BPC) [Add $89.00]

 
Features Specifications & Materials Installation Instructions
 
OEM Clevite and Typical Flex Joint is the Duroflex Joint
TJ/LJ/YJ 6" ARCHED TUBE FLARE

The Only Quick Release Jeep Flare!

Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.

Easily release the two Ball Lock Joints with an allen wrench and two 18-8 Stainless Steel bolts.

The most tire clearance in the industry, covering 35s on a stock TJ!

Best object deflection angle and turning clearance in the industry!

Gain 14" of Articulation as seen in Four Wheeler magazine!

Overline on TJ
OEM Clevite and Typical Flex Joint is the Duroflex Joint

MOST TIRE CLEARANCE:

Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire.
And compared to other typical tube fenders, we can't be beat:

2.6" ABOVE tire vs. ALL other Tube Fenders
5" BEHIND tire vs. Typical Flat Fenders

5.1" ABOVE tire vs. Stock Fenders
6.5" BEHIND tire vs. Stock Fenders

Standard Tube Fender Clearance

Stock Clearance Jeep
OEM Clevite and Typical Flex Joint is the Duroflex Joint

STRENGTH & COVERAGE BY DESIGN:


Measuring 70 3/4" from edge to edge the 6" flare gives just the right coverage.


Our signature Quick Release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt.

Tube Fender Clearance

Tube Fender
OEM Clevite and Typical Flex Joint is the Duroflex Joint

OBJECT DEFLECTION & TURNING CLEARANCE


A 21 Object Deflection Angle, the best in the industry.

Coverage where it counts, Turning Clearance where it's critical.
Object Deflection Clearance Tube Fender Turning Clearance
OEM Clevite and Typical Flex Joint is the Duroflex Joint

THE PROOF:

These diagrams silenced the critics and proved that MetalCloak truly is the best in the industry.
More details can be found in the Original Article.
.


MetalCloak with 4" Flare
vs. Typical Flat Tube Fender

MetalCloak with 4" Flare
vs. Typical Flat Tube Fender with 3" Flare
MetalCloak vs GenRight MetalCloak vs Poison Spyder
Dividing Line
OPTIONS:
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation Black Powdercoat Video
Dividing Line
Customers who bought this were also interested in...
Arched Fenders 8 Inch rear Flare 6 Inch Rear Flare

TJ Low Profile LED Marker Lights

OEM Clevite and Typical Flex Joint is the Duroflex Joint


Average Customer Review: 5 of 5 Total Reviews: 28 Write a review.

  0 of 0 people found the following review helpful:
 
Arched flares March 14, 2017
Reviewer: David Dalton from Franklin Furnace, OH United States  
What can I say. The workmanship was well executed as expectedhowever 2 design flaws I see immediately having just installed mine after painting.
1. The front and back mounts are off slightly, pass better than drivers but still a pain to attach these fenders when they are 1/4 to 1/2" off from bolt to bolt.
2. The loser mounting bolt on arched fenders needs to be 1/2 to 1" longer. I could barely get threads stared bc of them not lining up, along with scratching my paint

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
very clean February 14, 2017
Reviewer: Tyson Brooks from CRAIGVILLE, IN United States  
very clean and very professional metal work, I am more than impressed with the quality of these fenders, I've installed a set of poison spiders, and a set of rough county on different jeeps and the metal cloaks are superior in every way.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
6" arched flares April 20, 2016
Reviewer: Tristan Leslie from Estes Park, CO United States  
Absolutely fantastic product! Tight and solid connection to the fenders. Aggressive look and just the right coverage as to not throw who knows what on the windshield or your arm.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Flairs February 25, 2016
Reviewer: Dave Comstock from Vancouver, WA United States  
I am happy with them had mine painted was supprized that the only thing holding them on was 2 screws i will probably remove while on the trail  do not want to wipe off on a tree.i watched the video but never clicked that actually only 2 screws hold them.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
6" Arched Front Flares- TJ January 14, 2016
Reviewer: ERVIN RODRIGUEZ from APPLE VALLEY, CA United States  
Packaged Incredibly Well, Perfectly Fits the Inner Tube Fenders, Installs and Removes Easily. Great Product and Looks Astounding. Simply Strong Steel Flares. (Would be nice to have these in an optional Aluminum as well.) Very Satisfied with These Flares!

Was this review helpful to you?

View All Customer Reviews