6" Overline Front Flare, Pair, TJ/LJ/YJ
Jeep Wrangler TJ/LJ/YJ 6" Overline Front Flare


 
The MetalCloak 6" TJ/LJ/YJ Overline Tube Fender Flare gives you maximum tire clearance with that traditional "flat fender" appeal.

Quick Release Ball Lock Joints secure each end of the Flare for incredible strength while providing the best turning clearance, best object deflection angle and best tire clearance in the industry.
  • 2.6" ABOVE Tire vs. Typical Tube Fenders
  • 5" BEHIND Tire vs. Typical Tube Fender
  • 5.1" ABOVE Tire vs. Stock Fender Flares
  • 6.5" BEHIND Tire vs. Stock Fender Flares
Easy to install Overline Tube Flare kit includes:
  • Driver & Passenger 6" Tube Flares
  • Two 18-8 SS bolts
Note: Comp Rail or 4" versions are available.

Note: You MUST have MetalCloak Overline Tube Fenders to mount this flare. The flare only mounts on the MetalCloak Overline Tube Fender.

: $229.00

Availability: Raw Metal Usually Ships in 2 to 3 Weeks
Product Code: 2261

Choose Your Finish

Finish:
Raw Metal
Black Powder Coat (2261 BPC) [Add $89.00]

 
Features Specifications & Materials Installation Instructions
 
Dividing Line
TJ/LJ/YJ 6" OVERLINE TUBE FLARE

The Only Quick Release Jeep Flare!

Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.

Easily release the two Ball Lock Joints with an allen wrench and two 18-8 Stainless Steel bolts.

The most tire clearance in the industry, covering 35s on a stock TJ! (see below for details)

Best object deflection angle and turning clearance in the industry! (see below for details)

Gain 14" of Articulation as seen in Four Wheeler magazine!

Overline on TJ
Dividing Line

MOST TIRE CLEARANCE:

Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire.
And compared to other typical tube fenders, we can't be beat:

2.6" ABOVE tire vs. ALL other Tube Fenders
5" BEHIND tire vs. Typical Flat Fenders

5.1" ABOVE tire vs. Stock Fenders
6.5" BEHIND tire vs. Stock Fenders

Standard Tube Fender vs MetalCloak

Stock Jeep Tube Fender
Dividing Line

STRENGTH & COVERAGE BY DESIGN:


Measuring 70 3/8" from edge to edge the 6" flare gives just the right coverage.


Our signature Quick Release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt.

Tube Fender Clearance

Mounting Tube Fender
Dividing Line

OBJECT DEFLECTION & TURNING CLEARANCE


A 15 Object Deflection Angle, no other tube flare comes close.

Coverage where it counts, Turning Clearance where it's critical.
Object Deflection Clearance Tube Fender Turning Clearance
Dividing Line

THE PROOF:

These diagrams silenced the critics and proved that MetalCloak truly is the best in the industry.
More details can be found in the Original Article.
.


MetalCloak with 4" Flare
vs. Typical Flat Tube Fender

MetalCloak with 4" Flare
vs. Typical Flat Tube Fender with 3" Flare
MetalCloak vs GenRight MetalCloak vs Poison Spyder
Dividing Line
OPTIONS:
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation Black Powdercoat Video
Dividing Line
Customers who bought this were also interested in...
8in Overline Front Flare 6in Arched Front Flare 4in Arched Front Flare

2220 Arched Rub Rail

Dividing Line


Average Customer Review: 5 of 5 Total Reviews: 27 Write a review.

  0 of 0 people found the following review helpful:
 
Small issues May 2, 2017
Reviewer: Jordan North from Vancouver, WA United States  
When it says that all of the things that were under the hood will go back, they don't. Sure the inner fender wells make lots of clearance but at the cost of having to delete your radiator over flow box and moving your windshield wiper fluid. Also having to trim your battery tray so the wells will fit. Also the hood rubs against the actual fender and tears the paint off


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Stout as heck December 6, 2016
Reviewer: Norm from Newnan, GA United States  
Flares arrived well packaged. They are very stout, which matched well with the fenders. Even though they were each purchased more than a year apart the fit was great. Looking forward to more products in the future.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Second to none June 30, 2016
Reviewer: Dan Menihan from morris Plains , NJ United States  
Easily the strongest flares on the market with an easy and fast process of assembly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
6" overland flares April 15, 2016
Reviewer: Aaron Bowman from Sacramento , CA United States  
Parts fit great! Thank you

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Overline flares September 29, 2015
Reviewer: Mitchell Anderson from Springfield, OR United States  
Looks great fits nice and tight

Was this review helpful to you?

View All Customer Reviews