Jeep Wrangler TJ/LJ/YJ 6" Overline Front Flare

6" Overline Front Flare, Pair, TJ/LJ/YJ

MORE PRODUCT IMAGES:

The 6" TJ/LJ/YJ Overline Tube Fender Flaregives you maximum tire clearance with that traditional "flat fender" appeal.

Quick Release Ball Lock Joints secure each end of the Flare for incredible strength while providing the best turning clearance, best object deflection angle and best tire clearance in the industry.

2.6" ABOVE Tire vs. Typical Tube Fenders
5" BEHIND Tire vs. Typical Tube Fender
5.1" ABOVE Tire vs. Stock Fender Flares
6.5" BEHIND Tire vs. Stock Fender Flares

Easy to install Overline Tube Flare kit includes:

Driver & Passenger 6" Tube Flares
Two 18-8 SS bolts

Comp Rail, 4" or 6" versions are available.

$249.00

Availability: Raw Metal Usually Ships in 1 to 2 Weeks
Product Code: 2261

Choose Your Finish

Finish*:

Raw Metal
Premium Powder Coat Black Texture Semi-Gloss (2261) [Add $69.00]

Features

Installation

QUICK RELEASE 6" OVERLINE "FLAT" TUBE FLARE, TJ/LJ/YJ

The Only Quick Release Jeep Flare!

Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.

Easily release the two Ball Lock Joints with an allen wrench and two 18-8 Stainless Steel bolts.

The most tire clearance in the industry, covering 35s on a stock TJ! (see below for details)

Best object deflection angle and turning clearance in the industry! (see below for details)

Gain 14" of Articulation as seen in Four Wheeler magazine!

MOST TIRE CLEARANCE:

Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire.
And compared to other typical tube fenders, we can't be beat:

• 2.6" ABOVE tire vs. ALL other Tube Fenders
• 5" BEHIND tire vs. Typical Flat Fenders

• 5.1" ABOVE tire vs. Stock Fenders
• 6.5" BEHIND tire vs. Stock Fenders

Standard Tube Fender vs MetalCloak

STRENGTH & COVERAGE BY DESIGN:

Measuring 70 3/8" from edge to edge the 6" flare gives just the right coverage.

Our signature Quick Release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt.

Tube Fender Clearance

OBJECT DEFLECTION & TURNING CLEARANCE

A 15° Object Deflection Angle, no other tube flare comes close.

Coverage where it counts, Turning Clearance where it's critical.

THE PROOF:

These diagrams silenced the critics and proved that MetalCloak truly is the best in the industry.
More details can be found in the Original Article..

MetalCloak with 4" Flare
vs. Typical Flat Tube Fender

MetalCloak with 4" Flare
vs. Typical Flat Tube Fender with 3" Flare

SHIPPING & MATERIAL SPECIFICATIONS:

Tube Fender Shipping

The Overline Flare Kit Includes:

Fenders (Driver & Passenger)
• 1/8" Cold Rolled Steel Plate
• 1 1/2" .120 Steel Tubing

Hardware
• 18-8 Stainless Steel

INSTALLATION:

Installation is tremendously easy -- and we are not just saying that.

Read this article in Four Wheeler magazine that detailed how easy it was to install our Tube Fenders.

Installation Difficulty	Easy - Bolt On
Time to Install	5 Minutes (both sides)
Body Modification	None
Tools Required	Allen Wrench
Instructions	View Here...

TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.

OPTIONS:

Raw Metal

Premium Black Textured Powdercoat

If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. General turn around time for a Raw Metal order is 5 - 7 days.

Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two weeks. Check out our video on how we powdercoat.

Tube Fender Preparation