Rocker Rail, Pair, TJ
Metalcloak Bolt-On Rocker Rail, Pair, TJ

The MetalCloak TJ Rocker Rails are fully integrated rocker protection that utilizes a dual linear bolt pattern on the tub (with the first pattern below the door and the second pattern below the axis of the step) preventing the "can-opener" effect seen when typical rockers hit a hard object.

Additionally, the true integrated skid plate runs from under the tub to the tangent of the tube step creating a perfect source of force deflection.

Your Rocker Rail kit includes...
  • Driver and Passenger Rocker Rails
  • Grade 8 Hardware
Note: The MetalCloak Rocker Rails are designed to integrate with MetalCloak Fenders, while they can be used without MetalCloak fenders, they will not have the typical look of most aftermarket rockers.

: $399.00

Availability: Raw Metal Usually Ships in 1 to 2 Weeks
Product Code: 2312

Choose Your Finish

Raw Metal
Black Powder Coat (2312 BPC) [Add $124.00]

Features Specifications & Materials Installation Instructions
OEM Clevite and Typical Flex Joint is the Duroflex Joint

The Only Truly Integrated Rocker Rail for you Jeep Wrangler TJ!

7GA Hot Rolled Steel Plate
1 1/2" .120 Steel Tubing
Bolts using a Dual Linear pattern on the tub
No bolts going through your floorboard
Rugged and Integrated to hold up to anything
3" Step & Hi-Lift Mount built in.

With a built-in step, deflector plate and hi-lift mount, the Rocker Rail for the TJ protects and serves like no other.

Note: Ball ends are for look only. Unlike MetalCloak flares, the Rocker Rail steps are not removable.

OEM Clevite and Typical Flex Joint is the Duroflex Joint


The Rocker Rail is designed to become one solid unit of strength uniting our front fenders and rear fenders.

OEM Clevite and Typical Flex Joint is the Duroflex Joint


Though we rarely think of EVERYTHING... we try to meet all your needs.

The Rocker Rail has a built-in Hi-Lift point to make those critical repairs that much easier.

Dividing Line
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation Black Powdercoat Video
Dividing Line
Customers who bought this were also interested in...
TJ Overline Fender 8 Inch rear Flare 17/32 Rivet Nut Drill Bit

Rivet Nut Set

OEM Clevite and Typical Flex Joint is the Duroflex Joint

Average Customer Review: 5 of 5 Total Reviews: 23 Write a review.

  0 of 0 people found the following review helpful:
Metalcloak TJ Rocker Rails June 23, 2016
Reviewer: ERVIN RODRIGUEZ from APPLE VALLEY, CA United States  
Strong Rocker Rails, very well designed and constructed. The fully integrated design of the Rocker Rails fit both of my previously installed front and rear Metalcloak fender systems like a glove, that matched up perfectly. Easy installation as well. Recommend purchasing the 17/32 drill bit if you do not have one for the few holes recommended for the rivet nut install. Great product Metalcloak! Thanks!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Rocker Rails July 15, 2015
Reviewer: Nathanial Bryant from El Paso, TX United States  
Fantastic design. I couldn't be happier with these Rocker Rails, they fit perfectly on my TJ and look amazing. Solidly built and we'll designed. Thank you Metalcloak.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Rockers May 29, 2015
Reviewer: Gary Lees from Caryville, TN United States  
These are extremely well built, very heavy and high quality. Seems like some LED lights could be a neat addition.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Couldn't be tougher, wish hardware was different April 12, 2015
Reviewer: TJ from Norwood, MA United States  
While the product itself is very tough and I'll trust them dropping my jeep on rocks, the hardware is ok. No surprise being bolt on you have to drill into your jeep, but with the special rivet nut set up leaves something to be desired. If your holes aren't prefect the rivets can easily spin if not perfect. As for all the bolts, the hex head, while a eye pleasing choice, is prone to stripping if higher amounts of force are applied, or god forbid, you have to remove them in combination with the nylon nut. With that in mind, once in, they're not going any where.

As some have said, the drill bit (17/32") is an awkward one to find, I ended up ordering a Bosc bit from Amazon. I'd suggest doing the same upon your order.

Shipping: Packaged extremely well, but time from order to arrival was a bit of a wait (a month, maybe a couple days more). Well worth the wait, but be prepared.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Nice product April 9, 2015
Reviewer: DANIEL OVERCASH from CORNELIUS, NC United States  
Look great on my TJ, and seem well built. My only issue is the fact that the rivet nuts push the rocker off of the tub about 1/8 inch, due to the design of the nut itself. A bit of black silicone along the top of the rocker covered this well. Besides this small issue everything went well. The bit was hard to find locally, so I ordered a Bosch bit off of Amazon for around 10 bucks. I installed by myself with the help of a floor jack and a few pieces of 2x4.

Was this review helpful to you?

View All Customer Reviews