Shock Relocation & Clearance Kit, JK Lower Rear
Shock Mount Relocation & Clearance, JK Lower Rear


 
MORE PRODUCT IMAGES:
Actual product received may vary in minor ways from product rendering.


MetalCloak JK Wrangler Shock Relocation & Clearance Kit is a Bolt-on laser cut and CNC formed bracket that bolts above the factory shock mount allowing you to trim it out and gain 3" of clearance.

Note: This is for the rear stock shocks. This kit is NOT for the 6Pak shocks.

: $59.00

Availability: Usually Ships in 3 to 5 Days
Product Code: 7025


 
Features Specifications & Materials Installation Instructions
 

Dividing Line

JK REAR STOCK MOUNT & CLEARANCE KIT

JK Wrangler Rear Shock Mount & Clearance Kit
  • Gain 3" of Ground Clearance
  • Easy Installation, Just Bolts On
  • CNC Formed, Laser Cut 3/16 Steel
  • Gold Zinc Plating
  • Outboard Offset for 6Pak Body Clearance
Rear Shock Relocation Brackets

You Can Re-Use Your Stock Shocks or Other Aftermarket Shocks with The Shock Relocation Bracket

Note: If You Plan to Use the Old Man Emu Long Travel Shocks, You Must Use the Stock Shock Mount
Shock Relocation
Dividing Line
TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Customers who bought this were also interested in...
JK 6Pak Upgrade Kit JK 4 Door 3.5in True Dual Rate Coils JK Adjustable Bump Stops

JK Rear Adjustable Bump Stops

Dividing Line


Average Customer Review: 5 of 5 Total Reviews: 19 Write a review.

  0 of 0 people found the following review helpful:
 
February 8, 2018
Reviewer: RUBEN MENDEZ from EL PASO, TX United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
January 11, 2018
Reviewer: Josh Swissman from Las Vegas, NV United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
January 10, 2018
Reviewer: Jason Jurczak from Clearwater, FL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Tech note January 3, 2018
Reviewer: eric ennis from shingle springs, CA United States  
Dimensions.
Increase in ground clearance = 3".
Amount of lift bolt center to bolt center for the lower shock bolt = 2.5".

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
December 22, 2017
Reviewer: Brian Eagan from Slidell, LA United States  


Was this review helpful to you?

View All Customer Reviews