Lock-N-Load Replacement Upper Arm for Radius Suspension, TJ/LJ
Control Arms, TJ Lock-n-Load Upper Control Arm Radius Suspension


 
The MetalCloak Lock-n-Load™ Replacement Control Arm for Radius Suspensions (US Patent 9,174,504) is precision engineered to solve the most common problems with radius arm suspensions.

Designed for TJ/LJ Radius Arm Kits, by just replacing your Passenger Side upper arm, the Lock-N-Load...
  • Eliminates Radius Arm Bind
  • Dual-Purpose Control Arm
  • "Lock It" for Daily Driving
  • "Load It" for Trail Articulation
  • Built with Duroflex™ Joints
  • Compatible with most Radius Arms
If your Upper Control Arm measures between 16" and 17" from eye to eye, the Lock-N-Load can bring new life to your Radius Arms.

All parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements.

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep After Installing Any Suspension Components.

: $299.00

Availability: Now Shipping in 5 - 7 Days
Product Code: 7075


 
Features Specifications & Materials Installation Instructions
 

TJ/LJ LOCK-N-LOADTM REPLACEMENT FOR RADIUS ARM

"Typical" Radius Arm systems inherently bind causing premature bushing wear and excessive stress on bracketry. The Lock-N-Load solves that problem.

The unique design of the Lock-n-Load allows you to "LOCK" the control arm in a static "solid" state for on road safety and road handling or "LOAD" the arm to unleash the capabilities of your radius arm suspension!

To lock or load the control arm is easy; it does not require any additional adjustment for length -- turn one way to lock and the other to load - the control arm internals keep the correct length with no fuss!

Lock n Load Video
Standard Tube FEnder Clearance
OEM Clevite and Typical Flex Joint is the Duroflex Joint
WHAT ARE THE APPLICATIONS FOR THE LOCK-N-LOAD
Standard Tube FEnder Clearance

The Lock-N-Load is designed to ONLY work the front of a linked radius arm suspension.

The Lock-N-Load ONLY replaces the Passenger side upper control arm (your current driver side upper control arm remains in place).

The upper control arm must have a joint that connects at the lower control arm and a clevis that connects at the axle end.

The Lock-N-Load will currently work on most any radius arm suspension that the passenger side upper arm measures between 16" and 17" from eye to eye.

Note: If your radius arm set-up meets these parameters it will work whether you have a TJ or a JK or some other custom build (though it has only been designed and tested with the TJ in mind).

OEM Clevite and Typical Flex Joint is the Duroflex Joint
HOW DOES THE LOCK-N-LOAD WORK?
Standard Tube FEnder Clearance

The Lock-N-Load extends at full droop,
compressing one spring and extending the other.

At full stuff, the Lock-N-Load compresses.
Notice there is always compression and resistance.

Standard Tube FEnder Clearance
Standard Tube FEnder Clearance

Once "Locked" the Lock-N-Load coils are
fully compressed creating a rigid arm
for increased stability in daily driving.

In the "Loaded" position, the Lock-N-Load
is ready to provide up to 1.5" of compression or
extension for additional off-road articulation and to relieve stresses from bushings and brackets.
Standard Tube FEnder Clearance
OEM Clevite and Typical Flex Joint is the Duroflex Joint

THE LOCK-N-LOAD FEATURES THE DUROFLEXTM JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

Duroflex 101 Video
OEM Clevite and Typical Flex Joint is the Duroflex Joint

Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR...

A: You'd have the key to the MetalCloak Control Arms, the Duroflex Joint (Patent Pending)

Standard Tube FEnder Clearance

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint Typical Flex Joint MetalCloak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
OEM Clevite and Typical Flex Joint is the Duroflex Joint
THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

  • The best ride quality
  • No binding of your control arms.
  • None of the micro-wear that DESTROYS Flex Joints

Standard Tube FEnder Clearance
Standard Tube FEnder Clearance

High Misalignment...

By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...

  • Over 34° of Misalignment

Absorbs Micro-Movements...

Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...

  • Improved Ride Quality
  • None of the micro-wear that DESTROYS Flex Joints
Standard Tube FEnder Clearance
OEM Clevite and Typical Flex Joint is the Duroflex Joint
LOCK-N-LOAD ADJUSTABLE WRENCH
The Lock-N-Load wrench is specifically designed to work with your Lock-N-Load Control Arm.

This tool is designed to easily adjust to lock or load your control arm with ease. Made of laser cut 3/8" Hot Rolled Steel. Wrench is finished with a Gold Zinc finish for a classic high end, long lasting MetalCloak look.
Lock N Load Wrench
OEM Clevite and Typical Flex Joint is the Duroflex Joint

Customers who bought this were also interested in...
TJ/LJ Front Lower Long Arm Control Arms TJ/LJ Upper Front Radius Control Arms TJ Rear Long Arm TRACK bAR

TJ Front Long Arm TRACK bAR

OEM Clevite and Typical Flex Joint is the Duroflex Joint


Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
high quality March 14, 2017
Reviewer: Quentin Beechy from Millersburg, IN United States  
Was very impressed with the quality of the arm. The welds are not only high quality in strength but also look very professionally done. Product works exactly as intended.

Was this review helpful to you?