TJ Rear Long Arm Durotrak Track Bar
Control Arms, TJ/LJ Lower, Short


 
The MetalCloak TJ Rear Long Arm Durotrak Track Bar is uniquely engineered for less road bump.
  • 1.25" Solid Chromoly for the Ultimate Strength
  • Designed for Better Roll Center
  • Adjustable Length
  • No Frame Interference
  • Equipped with the Durotrakô Bushing (Pat Pend #14/622,350)
Note: The Track Bar Specifications are Just Starting Points. ALL JEEPS ARE DIFFERENT. MetalCloak Recommends Seeing a Suspension Specialist for Correct Track Bar Lengths For YOUR Jeep.

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once MetalCloak Suspension is Installed.

: $179.00

Availability: Usually Ships in 5-7 Days
Product Code: 7096


 
Features Specifications & Materials Installation Instructions
 
NOT JUST ANY TRACK BAR BUSHING... MEET THE DUROTRAKô
This short video covers what you need to know about the Durotrak Bushing. The Durotrakô Bushing (Pat Pend #14/622,350) is a bushing made with a proprietary rubber compound unique to MetalCloak. The Durotrakô bushing is comprised of two pieces that thread together allowing this bushing easy to install without a press. Eliminate squeaks and clunks in your steering with the technology of MetalCloak's Durotrakô bushings; exclusively found in MetalCloak track bars.

Check Out the Video >>>

Durotrak Bushing Video

Durotrak Bushing

The Durotrakô Bushing (Pat Pend #14/622,350) is a NVH (noise, vibration, harshness) bushing made with a proprietary rubber compound unique to MetalCloak. The Durotrakô two part bushing is comprised of two pieces that thread together making this bushing simple to install without a press, reduces vibration and harshness transferred to the driver, and improves vehicle steering input.

Dividing Line
DUROTRAK REAR TRACK BAR DESIGNED FOR ULTIMATE STRENGTH & CLEARANCE
Formed for ultimate Up-Travel & Down-Travel we built it out of Solid Chromoly for strength and improved ride stability. The Rear Long Arm Durotrak Track Bar is equipped with the new MetalCloak two part Durotrakô bushing for precision movement and refined performance.
TJ Long Arm Front Track Bar
Dividing Line
TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Customers who bought this were also interested in...
Keep Calm and Rubicon Camo Hat Mesh Cap

Dividing Line


Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Install and initial impression July 22, 2016
Reviewer: Jason Pinkerton from Corbett, OR United States  
I installed this track bar onto our 2004 TJ with a RE 3.5" short arm kit and Currie Ford 9" rear end. I was a bit unsure of the proper fit as Currie welds the track bar bracket on their rear ends. A quick phone call to the folks at Metalcloak and they had me on the right track. I found them to be knowledgeable and helpful. Shipping was faster than expected.

The install was simple!  I looked at their online .pdf instructions which I found helpful but not critical.

The product is far superior to any other track bar on the market and in my opinion worthy of the higher price. The bar ends remove the typical bind situation on the factory track bar created by changing the rear suspension geometry when the vehicle is lifted. A drastic improved ride quality and cornering ability are the result. I would highly recommend this product to anyone looking to enhance the overall level of their Jeeps performance.

Was this review helpful to you?