JK Sway Bar Ground Clearance Kit



 
The JK Sway Bar Ground Clearance Kit allows Jeep JK Wrangler Rubicon Edition owners to increase the ground clearance of the Automatic Sway Bar by 1 3/4".

JK Sway Bar Clearance Kit Includes
  • Custom Bolt
  • Custom Washer
Please Watch Video Below.

Note: As of May 2014 MetalCloak Updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.

: $14.00

Availability: Now Shipping in 5 - 7 Days
Product Code: 3141


 
Features Specifications & Materials Installation Instructions
 

OEM Clevite and Typical Flex Joint is the Duroflex Joint

Customers who bought this were also interested in...
JK Front Bumper JK 56in light caps JK Bumper Base Skid Plate

JK Bumper Non Winch Cover Plate

OEM Clevite and Typical Flex Joint is the Duroflex Joint


Average Customer Review: 3.5 of 5 Total Reviews: 9 Write a review.

  1 of 1 people found the following review helpful:
 
Very difficult for 2015 Rubicon November 20, 2016
Reviewer: John Ferguson from Nampa, ID United States  
If you're installing this on a 2015 Rubicon, be aware that the instructions in the video is lacking a couple of important steps. On that model there's a crash bar running across the front that will prevent the motor from rotating up. Must remove both ends of the sway bar, push it back. After a bit of work it can rotate past he bar.

Then in trying to reattach the sway bar, the installed Metal Cloak bumper was hitting the rubber connector piece and the holes were about a half inch off on the swap bar mount. I had to completely remove the entire bumper to get the sway bar re-attached.

With the motor swung up there's a ridged tube that runs across the bottom of the radiator that runs right across the face of the unattached connector. To attach the plug you have to either bend the tube way up out of the way or re-route it some way.

To reinstall the winch plate there's still the rubber piece that's in the way. I gave up in frustration and put everything back. Maybe another day.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
JK Sway Bar Ground Clearance Kit November 20, 2016
Reviewer: Robert Crow from Cottonwood, AZ United States  
Not used, with the sway bar unit turned up it interfered with winch placement.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Easy kit for 2016 Rubicon April 13, 2016
Reviewer: Kyle Markowski from Houston, TX United States  
Arrived in reasonable time frame and install was easy. No drilling or cutting of crash bar required. Much tougher to install while still having a crash bar nut not impossible. Just wasn't clarified in instructions to drop sway bar down entirely to have room to flip motor up out of the way. Otherwise great product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
JK Sway Bar Ground Clearance Kit November 12, 2015
Reviewer: Ken H from Placerville, CA United States  
Easy to install. Once you figure out what hole to use
was the only iffy part of the instruction need more clarification. Great fit and lots of clearance. 2 star instructions on that one point,  5 star product.
Something that should have been done by the factory.
The most bang for your buck, Cheaper than a pair of fuzzy dice. Great Product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Parts March 19, 2015
Reviewer: Kirk Stricklin from Canby, OR United States  
Thanks Great Service!

Was this review helpful to you?

View All Customer Reviews