Forged Duroflex Joint, 2 5/8" x 9/16" BH x 2 5/8" Housing x 1 1/4" Straight Shank
2 5/8" OD x 2 5/8" W Duroflex Joint, 1 1/4" Straight Spud


 
MORE PRODUCT IMAGES:
Actual product received may vary in minor ways from product rendering.


The MetalCloak's Game-Changing Duroflex™ Joints provide the industry's best ride quality. Period.

Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.

Our Patent Pending Duroflex Joints (metalcloakpatents.com) feature:
  • Maximum Vibration Dampening
  • Self-Centering
  • Minimum Bushing Wear
  • Misalignment: 34° Joint, 68° Control Arm
  • Unconstrained Rotational Flex
  • Low Maintenance and Easily Rebuildable
  • Gold Zinc Plated for Corrosion Protection
Duroflex™ Joints a specifically designed for installation on both ends of a suspension link and/or control arm.

Kit Specs:
  • Fits Housing Diameter = 2 5/8"
  • Bushing Width = 2 5/8"
  • Bolt Hole Diameter = 9/16"
  • Shank Thread = 1 1/4"-12 UNF
Note: Warranty valid ONLY if Duroflex Joints are installed on both ends of the control arm.

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Truck Once MetalCloak Suspension is Installed.

: $59.00

Availability: Usually Ships in 1 Week
Product Code: 7315

Right Hand or Left Hand?

Thread Type*:
Right Hand Threaded Rod End
Left Hand Threaded Rod End

 
Features Specifications & Materials Installation Instructions
 

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

Dividing Line

WHY THE DUROFLEX JOINT?

Standard Tube FEnder Clearance

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint Typical Flex Joint MetalCoak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable

Dividing Line

THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.

Duroflex Kevlar Bushing The MetalCloak Kevlar® bushings can be identified by the M located on the surface.

DuPont™ Kevlar® continues to take on new challenges, their scientists are continuously innovating and working on a range of new opportunities through collaborations with communities, industrial manufacturers, and governments. Together we’re bringing the strength, durability and performance of Kevlar® to new frontiers. Kevlar® aramid fiber is pushing boundaries and defying obstacles every day.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

  • The best ride quality
  • No binding of your control arms.
  • None of the micro-wear that DESTROYS Flex Joints

Standard Tube FEnder Clearance
Standard Tube FEnder Clearance

High Misalignment...

By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...

  • Over 34° of Misalignment
  • Over 68° per Control Arm

Absorbs Micro-Movements...

Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...

  • Improved Ride Quality
  • None of the micro-wear that DESTROYS Flex Joints
Standard Tube FEnder Clearance
Standard Tube FEnder Clearance

True Bearing Surface...

The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...

  • Maximum Rotation & Articulation
  • No "Binding Up" of the Control Arms

Low Maintenance & Rebuildable...

Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others...

But, when you do need to rebuild it, it is MetalCloak Easy!

Just pull out the Duroflex Bushing, clean it up, add some new Teflon impregnated, synthetic silicone grease. Reassemble.

Done.

Standard Tube FEnder Clearance

Dividing Line

DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms!

Standard Tube FEnder Clearance Standard Tube FEnder Clearance

Dividing Line

METALCLOAK'S DUROFLEX JOINT IN ACTION

We tested MetalCloak's Duroflex Joint using a "Shaker Table" and Seismometer app to show how much Vibration Dampening the Duroflex Joint gives you compared to other industry leading joints.

Check Out the Video>>>

Dividing Line

JOINT SPECIFICATIONS

Standard Tube FEnder Clearance

Dividing Line

TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.

Dividing Line

Customers who bought this were also interested in...
Keep Calm and Rubicon Wraparound Camo Hat

Mesh Cap

Dividing Line


Average Customer Review: 5 of 5 Total Reviews: 10 Write a review.

  0 of 0 people found the following review helpful:
 
Great products but excellent service. November 30, 2018
Reviewer: Jim M from Lake Elsinore, CA United States  
I bought a couple sets of duroflex bushings to replace the clacky prematurely worn garbage heims for my lower control arms. I then proceeded to beat the everliving %#*$ out if them in the desert and they performed great. I can't speak to their longevity yet, as I've only had them in for a few weeks but on and offroad manners are greatly improved, and from the people I know who run them they've had great luck for a long time.

My biggest reason for this review is that both times I spoke with the gentleman who work here they answered my questions without issue, and went above and beyond to make sure I was taken care of. Even when I called back after my order was already placed to fix my mistake of ordering the wrong size.

I'll definitely be giving metal cloak my business in the future. Thanks guys for being a good name in the offroad industry!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awesome joints August 8, 2018
Reviewer: Heath Ericson from North Little Rock, AR United States  
These things are pure beef and used them for make a 4 link in the rear of my LJ.  I have had Metalcloak short arms for 4 years now and cannot say enough about the smooth ride and flex that they have.  The same will be felt on my longarms that these are going in.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Duroflex Joint June 3, 2018
Reviewer: Mark St. Peter from Victorville, CA United States  
Awesome customer service and top quality parts at a good price Thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Metalcloak cares about customers May 30, 2018
Reviewer: Kelly Hales from Oro Valley, AZ United States  
I recently ordered Duroflex joints for a project and was quite surprised to get a call from them just to let me know that they were just shipped. I have never had that kind of care from a business. I will definitely order from them again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Worth every penny, even the reasonable shipping October 27, 2017
Reviewer: Damien from Paradise, UT United States  
I was replacing a worn out set of clevite bushings on my Teraflex long arms, the Jeep was riding like Fred Flinstone's car & felt like the Jeep was coming apart. Then, I found out about Metalcloak Duroflex on a Jeep forum message board, and I admit,  I was skeptical, I called Metalcloak to make sure they would fit, the guy I talked to on the phone said Metalcloak did not make anything that would fit Teraflex arms (he lied)  but I ordered them anyway and sure enough they fit. I installed them and holy mother of God, I cannot believe the ride quality I am getting with just a single set of Duroflex joints. Teraflex has much nicer and more informed staff, but Metalcloak has the best joint bushings around.

Was this review helpful to you?

View All Customer Reviews