Aluminum Hardline Tube Fenders, JK Wrangler, Front
Aluminum Hardline Tube Fenders, JK Wrangler, Front

JK Wrangler Aluminum Hardline Tube Fenders give you the quality craftsmanship of MetalCloak Fenders; now in a durable, light-weight aluminum option.

The Aluminum Hardline fenders are 1/3rd the weight of our Steel Hardlines and though not quite as tough, the aluminum still provides much more protection over the factory plastic flares. The aluminum will not rust and is a great option for Jeepers that have issues with corrosion and rust.

MetalCloak Aluminum Hardline Fenders give additional tire clearance over the factory plastic parts and have the best fitment available; incorporating a secondary manufacturing process, we apply a large radius press bend for a closer match to the factory lines. There is no other fender that provides the combined great looks for your Jeep and the protection of metal.

Complete Stock Replacement Fender Kit Includes:
  • Driver & Passenger Fenders
  • All Installation Hardware and Brackets
"Aluminum Inner Fender Liners & LED Marker Lights are not included"
Click here to add fender liners to your order now.

Click here to add LED Marker Lights to your order now.

: $549.00

Availability: Raw Metal Usually Ships in 1 - 2 Weeks
Product Code: 3205-AL

Choose Your Finish

Raw Metal
Black Powder Coat (3205-AL-BPC) [Add $129.00]
Black Powder Coat-Fender/Bracket [Add $168.00]

Features Specifications & Materials Installation Instructions
Dividing Line
Increased strength and tire clearance with the best fitment available in MetalCloak Aluminum Hardline Fenders!

MetalCloak JK Hardline Fenders fit better because of the secondary process that applies a large radius bend to the top of the tubular Aluminum fender; this best follows the lines of the factory Jeep body.

Increase your tire clearance by replacing the factory plastic flares with the strength of light weight ALUMINUM.

Hardline's from MetalCloak feature:
  • Rust and Corrosion resistance
  • Increased Tire Clearance
  • Increased Strength
  • Precision Fitment
  • Easier to Install
  • The Best Quality Craftsmanship
  • A One Piece Aluminum Fender Solution
  • Made in the USA
Hardline Side View
Dividing Line
The JK Body is notoriously weak. Therefore fender manufacturers must be careful in developing products ensuring they fit precisely and put no undue stress on the vehicle. Unfortunately, many of the JK Fender Manufacturers have ignored this. Below is a comparison of the typical aftermarket JK Tube Fender from a well known manufacturer and the new MetalCloak Aluminum Hardlines.
Overline on TJ Hardline Fenders JK
Dividing Line

Hardline on JK

Other companies set the top sheet metal over the top of the tube creating an edged or gapped surface, this method is easier for manufacturing.

MetalCloak precisely cuts the top metal plate and aligns its' top surface in "tangent" with the tube. This creates a flush top surface, sure it's more work but the result is a smoother finished look.
Dividing Line

Hardline on JK

MetalCloak Aluminum Hardline Fenders provide the most coverage behind the tire that we offer, this helps with road spray and mud splatter.

Each fender is precision fitted and hand welded to ensure a perfect fit.
Dividing Line
MetalCloak is more than just looks; It is about functionality. We build nothing unless it serves a functional purpose. In this case our fenders provide clearance, superior fit, the light weight and corrosion resistance of ALUMINUM, AND the signature strength we are known for.

The JK is notorious for having weak sheet metal paneling.

To overcome this, we created a unique bracketing system that adds exponential strength to the factory mounts. These brackets allows for a simplified installation that add the foundation that support the MetalCloak Aluminum Hardline Fenders.

Tube Fender
Dividing Line


MetalCloak's JK Aluminum Hardlines provide the most clearance behind the tire and 3 inches of additional clearance over the tire compared to stock!

  • 3" of Additional Clearance vs. Stock JK Fenders

JK Tube Fenders

JK Tube Fenders
Dividing Line


MetalCloak Aluminum Hardline fenders closely follow the factory body lines with a large radius bend on the top section. This radius bend provides the best fitment of any aftermarket tube fender!

While "some" manufacturers cut corners and pass on a poor fitting product onto the end user, MetalCloak adds value by applying additional processes to ensure the best fitting Aluminum Tube Fender available. See the differeence!
JK Tube Fenders JK Tube Fenders
OEM Clevite and Typical Flex Joint is the Duroflex Joint
MetalCloak's Aluminum Hardline Fenders are about clean lines and great fitment; it continues down to the last details.

Integrated attachment points for Low Profile LED Marker Lights are seamlessly tucked under, and out of harm's way to complement the finished look.
Hardline Aluminum LED
Dividing Line

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Raw Aluminum Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation
Dividing Line
Customers who bought this were also interested in...

Dividing Line

Average Customer Review: 4.5 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
perfect December 16, 2017
Reviewer: Daniel DeMarco from Enumclaw, WA United States  
love the look works perfectly

Was this review helpful to you?

  0 of 1 people found the following review helpful:
Excellent craftsmanship November 15, 2017
Reviewer: Samuel Hamid from Pearland, TX United States  
I am seriously impressed by the quality of the welds and overall craftsmanship. Unbelievably light weight. Install/fitment was incredibly simple and easy. The Hardline series is a bit wider than I expected. Was initially disappointed with that factor but it's only encouraged me to invest in aftermarket wheels with the proper backspacing in order to widen my tires a bit further pass the fenders.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
Not buying that guys comment on customer service February 10, 2017
Reviewer: Jesse Cohen from berlin, CT United States  
Im not buying this guys comment in regards to the hardline tube fenders. Yes maybe he had to do some grinding but complaining about the customer service, no way! Every time I bought a product from these guys they took the time to call me and answer any questions or concerns that I had with install and walked me through the process, even mailing me extra nuts and bolts when some threads got stripped. Customer support has always been top notch along with making superior products is why I keep coming back. I've been a customer of theirs for years and never had an issue. Hopefully this year I'll be able to buy these fenders if I can sneak some funds past the wife.

Was this review helpful to you?

  1 of 2 people found the following review helpful:
5 Star craftsmanship 2 Star fit October 3, 2016
Reviewer: Fred Schramm from Tehachapi, CA United States  
The craftsmanship of the fenders is outstanding (Gorgeous looking welds). The fit of the fenders wasn't that great. lots of grinding to get them to fit correctly. I do like the backing structure Metal cloak engineered. Customer support was well below average. I'm sure the fenders fit great on one of the employees 2016 JK, didn't fit great on my 2015 JK.

Was this review helpful to you?