1500/2500/3500 Dodge Front Control Arm Set (2003-2009)
Dodge Control Arms, Front Control Arms, 2003-2009, Dodge 2500,Dodge 3500, Dodge Ram


 
The MetalCloak Dodge Front Control Arms for the 1500/2500/3500 are precision engineered for all the flex and the smoothest ride.

Equipped with the MetalCloak Duroflex self-centering composite bushings at both ends for a combined misalignment of over 76 degrees.

Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.

All parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements. MetalCloak takes the guess work out and engineered these in corrected lengths designated for lifted or leveling applications.

The easy to install Front Control Arm Kit (2003-2009) includes:
  • Left & Right Side (Driver & Passenger)
  • 2 Upper control arms
  • 2 Lower control arms
  • 8 Duroflex spherical joints
  • 16 Retainer washers
  • 16 C clips
Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Truck Once MetalCloak Suspension is Installed.

: $549.00

Availability: Usually Ships in 2 to 3 Days
Product Code: 8002

Features Specifications & Materials Installation Instructions
 

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

Dividing Line

Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR...

A: You'd have the key to the MetalCloak Control Arms, the Patent Pending Duroflex™ Joint ( metalcloakpatents.com)

Standard Tube FEnder Clearance

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint Typical Flex Joint MetalCloak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
Dividing Line
THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.
Duroflex Kevlar Bushing The MetalCloak Kevlar® bushings can be identified by the M located on the surface.

DuPont™ Kevlar® continues to take on new challenges, their scientists are continuously innovating and working on a range of new opportunities through collaborations with communities, industrial manufacturers, and governments. Together we’re bringing the strength, durability and performance of Kevlar® to new frontiers. Kevlar® aramid fiber is pushing boundaries and defying obstacles every day.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

  • The best ride quality
  • No binding of your control arms.
  • None of the micro-wear that DESTROYS Flex Joints

Dividing Line
DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28˚ more articulation and flex then typical control arms!

Standard Tube FEnder Clearance Standard Tube FEnder Clearance
Dividing Line
Customers who bought this were also interested in...
Keep Calm and Rubicon Wraparound Camo Hat

Mesh Cap

Dividing Line


Average Customer Review: 5 of 5 Total Reviews: 13 Write a review.

  1 of 1 people found the following review helpful:
 
2004 Ram 2500 5.9 diesel 4X Frt Control Arm Set July 6, 2018
Reviewer: DBrooks Morrow from North East TX - United States  
Well built control arms, the best I have ever seen! Was able to do this installation my self, but understand, my shop is well equipped... This only issues that caused a slight delay was the Passenger-Cab side upper control arm mounting bolt. The bolt pulls out on the engine side of the frame. The diesel exhaust coupler must be removed and the exhaust pipe must be maneuvered out of the way to free the bolt. Don't know if this is an issue on the gas engines but it will cause a slight delay on the diesels. The product installed easily and fit perfectly, did a basic string alinement and took it for a drive, what a difference..., no rubbing, full turning radius accomplished, getting it properly aligned tomorrow. Metalcloak has an excellent product line, I will be referring them to others, just as I was referred to Metalcloak! :)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Control arms September 30, 2017
Reviewer: Peter Leavitt from Hoopa, CA United States  
This is the second  set of control arms. One set for a 2nd gen dodge ram 2500 and one for a third  gen dodge ram 3500. They are very well built and the coating they come with surprisingly  stands up to abuse. I like the fact that they are slightly longer than stock and I run 35x12.5x17  tires with only a leveling kit on the 3 G truck. Have had a lot of people ask about them and  would  think M.C. could  hook me up with a free t-shirt shirt (2xl hint hint) Tech  people great to deal with and communication  on order status top notch. Thanks for a great product for a fair price.



Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great product!!! March 2, 2017
Reviewer: Kyle Laskey  
I did a lot of research on buying control arms for my lifted dodge ram before pulling the trigger. After watching metalcloaks video I was impressed to say the least. Even though I don't plan on taking my cclb school bus down any trails I'm diggin the flexibility defiantly a huge difference compared to my blown out ones I replaced. The customer service was better than expected with a phone call the day after ordering them. Very impressed and if I get a jeep I'll be back for sure.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2008 Dodge 2500 Control Arms December 21, 2016
Reviewer: Barry Madsen from Omaha, NE United States  
I am completely satisfied with my purchase. I can feel a complete difference in the ride of my truck. Very smooth. In the beginning I had a lot of questions, Metalcloak was very helpful answering my questions to make sure I was getting the right product for my application.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
control arm for 2500 ram November 23, 2016
Reviewer: Danys Dallaire from Vald'or, QC Canada  
thank for the service every thing is ok and no delay it very good thank again

Was this review helpful to you?

View All Customer Reviews