1500/2500/3500 Dodge Front Control Arm Set (2010-2012)
Dodge Control Arms, Front Control Arms, 2010-2012, Dodge 2500,Dodge 3500, Dodge Ram


 
The MetalCloak Dodge Front Control Arms for the 1500/2500/3500 are precision engineered for all the flex and the smoothest ride.

Equipped with the all new MetalCloak Duroflex self-centering composite bushings at both ends for a combined misalignment of over 76 degrees.

All parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements. MetalCloak takes the guess work out and engineered these in corrected lengths designated for lifted or leveling applications.

The easy to install Front Control Arm Kit (2010-2012) includes:
  • Left & Right Side (Driver & Passenger)
  • 2 Upper control arms
  • 2 Lower control arms
  • 8 Duroflex spherical joints
  • 16 Retainer washers
  • 16 C clips
Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Truck Once MetalCloak Suspension is Installed.

: $549.00

Availability: Usually Ships in 2 - 3 Weeks
Product Code: 8003


 
Features Specifications & Materials Installation Instructions
 

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

Duroflex 101 Video

Dividing Line

Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR...

A: You'd have the key to the MetalCloak Control Arms, the Duroflex™ Joint (Patent Pending)

Standard Tube FEnder Clearance

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint Typical Flex Joint MetalCloak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable

Dividing Line

THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

  • The best ride quality
  • No binding of your control arms.
  • None of the micro-wear that DESTROYS Flex Joints

8in Flare Video

Dividing Line

DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28° more articulation and flex then typical control arms!

Standard Tube FEnder Clearance Standard Tube FEnder Clearance

Dividing Line

X
X
Customers who bought this were also interested in...
Keep Calm and Rubicon Wraparound Camo Hat

Mesh Cap

Dividing Line


Average Customer Review: 4 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Solid October 27, 2015
Reviewer: Anonymous Person from El Paso, TX United States  
I am happy with the 2500 Dodge Control arms.  I have my turning radius back with no tire rub with 35 inch tires, which is why I purchased the product.  My only complaint is that the Metalcloak control arm bushings are for 16mm bolts.  My 2012 Ram Power Wagon came stock with 18 mm bolts for the lower control arm bushings at the axle. I purchased cam bolts at an auto parts store just in case I had to cut mine off and they happened to be 16 mm.  I mounted the control arms and all seems to be fine.  I just hope the smaller bolt will hold up offroad in the larger hole.  Is there any chance of making Duraflex joints for an 18mm cam bolt?

Was this review helpful to you?