ExoCorner LED Kit, Pair, JK
JK ExoCorner Crawler Kit

The JK Wrangler ExoCorner LED Kit provides additional strength and rock-biting protection to the vulnerable corner of your 2-door or 4-door JK without the extensive body mods required with other corner guards.

Designed as a kit to work with the MetalCloak ExoSkins and Rear Stock Corner Plates, the parts can also be purchased individually.

The ExoCorner LED Kit kit includes:
  • 2 ExoCorner Rails
  • 2 JK LED Housings
  • LED Tail Light
  • Driver & Passenger Rear ExoSkin
Note: This Product does not come in raw metal.

: $499.00

Availability: Usually Ships in 1 Week
Product Code: 3430

Features Specifications & Materials Installation Instructions
Dividing Line

Shipping MetalCloak Fenders

The ExoCorner is the first Corner Guard for the JK that requires no cutting of the JK body just to make it fit.

1. ExoCorner Rail

T6 Aircraft Grade Aluminum provides over a 1/4" of True Corner Protection.

2. JK LED Housing

T6 Aircraft Grade Aluminum replacement LED housing is the first truly solid JK Aftermarket Light System that requires no Body Modification and can be used with or without the ExoCorner bolting right into your stock light position.

3. LED Tail Light

Much brighter then stock lights, these LEDs are SAE/DOT compliant and wire up directly.

4. Rear ExoSkin & Rear Corner Plate

Providing just the right amount of protection while eliminating the need to cut up your JK just to make the corner fit.

This kit's bolts integrates with the JK Rear ExoSkin for the 2-Door ( SKU: 3411) or 4-Door (SKU: 3410)

Dividing Line


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Customers who bought this were also interested in...

Dividing Line

Average Customer Review: 4.5 of 5 Total Reviews: 11 Write a review.

  0 of 0 people found the following review helpful:
Nice product October 11, 2018
Reviewer: D.A. from Blakely Island, WA United States  
Perfect fit with the Overline fenders.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Lights September 6, 2018
Reviewer: Mark Friskel from Fairchild AFB, WA United States  
Super great looking, and super easy to install. Don't forget the correct drill bit for the nutsert.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great December 8, 2016
Reviewer: Javier Castorena from Delhi, CA United States  
Serves a purpose and looks great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
ExoCorner LED Kit March 4, 2016
Reviewer: Shawn Cordsen from Greenwood Village, CO United States  
Finished off the full Overline system nicely. As expected fitment was perfect. Installation was a bit difficult given the curvature of the JK body, but I quickly found that by sourcing non-locking nuts I could partially install the Exo-Corner Rails and use them as templates to mark and drill the necessary holes (this worked far better than using clamps). The only issue was that of bolt length. Metalcloak provided a shorter and longer bolt to connect the lower inside corner of each Exo-Skin. Unfortunately, the inner contours of the tail light cavity (driver or passenger) did not provide enough space to utilize the longer bolt. It simply would not insert far enough to tighten the Exo-Skin to the body. Not a huge deal, a shorter stainless steel bolt and some black paint fixed it right up.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
good protection....BUT.... June 22, 2015
Reviewer: Stacey Callahan from Buena Park, CA United States  
when spending this kind of money for tail lights you would THINK that the LED's would have a built in resistor to fix the fast blinking. NOPE......it's NOT a complete kit if I have to run around town looking for a fix.

Was this review helpful to you?

View All Customer Reviews