JK Frame-Built Combo Bumper Base
JK Frame-Built Combo Bumper Base

Actual product received may vary in minor ways from product rendering.

The JK Combo Bumper Base is a Frame Built Bumper and Winch Plate combination that replaces the weak factory plastic bumper with a 3/16 thick steel base that attaches to the frame of the Jeep.

The Frame-Built Combo Bumper Base allows you to choose your end caps, winch guards, stingers and light bar attachments. Whatever your needs the Combo Bumper Base can handle it.

The Frame-Built Combo Bumper Base is the perfect bumper to start your JK Jeep build or to finish off a highly modified custom Jeep.

Frame-Built Combo Bumper Base is finished in MetalCloaks signature black powdercoat.

Note: As of May 2014 MetalCloak Updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.

: $299.00

Availability: Usually Ships in 2 to 3 Days
Product Code: 3160

Bumper Accessories:
Winch Plate Cover [Add $44.00]
Skid Plate [Add $57.00]

Features Specifications & Materials Installation Instructions
Dividing Line


  • Hot Rolled Steel 3/16" Steel Plate
  • Integrated Winch Plate
  • Shackle Mounts hold up to a 7/8" adapter
  • Premium Black Texture Powder Coating
3101-Skewed View Schematic


The first step on your Frame-Built adventure, the Combo Bumper Base is designed to fit all major winches with no modification. All components bolt directly on creating a unified bumper ready to meet any challenge.

Once you choose your base, select your End Caps, Fairlead, Shackle Mounts and Hoop, to complete your Frame-Built adventure. The built-in Winch Plate will fit most winches including the Warn Powerplant.


Installs in less than an hour, and all components are bolt-on, so you can modify or replace as needed.

Side View Schematic

Front View Schematic

Top View Schematic

Dividing Line

Our Premium Black Textured Powdercoat is the best in the industry. Check out our video on how we powdercoat.
Dividing Line


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Customers who bought this were also interested in...
8in Overline Front Flare 8in Overline Front Flare Winch Hook D Ring 6in Arched Front Flare

Dividing Line

Average Customer Review: 5 of 5 Total Reviews: 14 Write a review.

  0 of 0 people found the following review helpful:
Great Bumper December 22, 2017
Reviewer: Mario Santa Cruz from Stockton, CA United States  
Perfect fit and the best part it’s your winch gets protected and there’s no way to get stolen Whitout removing the bumper.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great Bumper...Poor Information December 17, 2017
Reviewer: Allen Carr from Saxonburg, PA United States  
The Good....
Metalcloak did a great job rushing this to us for Christmas...Thank You!!!
The bumper is well built and looks good.

The Bad...
When ordering online they do not disclose that the vacuum pump need relocated and requires an additional kit. So now part way thru the installation the Jeep is sitting waiting for the relocation kit to come which was just ordered and probably take 2-3 weeks to receive.
The directions do show where to cut the vacuum bracket, but are kind of vague considering that’s the point that you realize you also need the relocation kit.

All in all...
It’s a nice bumper, and if we were doing a second install the problems encountered would be eliminated.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
JK Frame-Built Combo Bumper Base November 20, 2016
Reviewer: Robert Crow from Cottonwood, AZ United States  
I would have prefered a real stubby with squared off end caps but a nice strong bumper it is.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Soild and Beautiful August 16, 2016
Reviewer: Daniel Stemen from Monrovia, CA United States  
I will say that the instructions we unclear that the Vacuum pump bracket needs to be cut out. In the video it shows cutting wheel on the tools list but then never actually tells you to cut out the bracket. The bumper does not fit unless this bracket is removed requiring a relocation. I am very happy with the bumper but this portion of the install was very unclear.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great-looking bumper April 10, 2016
Reviewer: Geoffrey Berry from Tucson, AZ United States  
Great quality. Make sure you have a grinder or so to remove the vacuum pump bracket. Besides the cutting it was very easy to install

Was this review helpful to you?

View All Customer Reviews