JK Wrangler "DB3" Rear Control Arm Correction Bracket
JK Wrangler "DB3" Rear Control Arm Correction Bracket


 
MetalCloak's Patent Pending Rear Control Arm Correction Bracket "DB3"(metalcloakpatents.com).

Want a taller lift but want to keep the great handling of your Jeep without the cutting and welding required with typical lift kits?

Look no further; MetalCloaks newest "Game Changing" product.

Our simple to install, Bolt-On bracket re-positions the rear control arms to operate within a corrected radius. This system drastically reduces the feel of bump-steer/axle steer on lifted Jeeps and provides handling characteristics comparable if not better than a stock height Jeep. This is only available from MetalCloak.

Enjoy confidant handling and the smooth, comfortable ride that you demand from your Jeep with the "DB3" Rear Control Arm Kit.

Note: This alignment bracket is designed to be used with Adjustable rear control arms. Not to be used with stock control arms.


: $299.00

Availability: Usually Ships in 2 - 3 Days
Product Code: 7197

Features Specifications & Materials Installation Instructions
 

Dividing Line

REAR CONTROL ARM CORRECTION BRACKET

This short video covers what you need to know about the basics of The DB3 Bolt-On Rear Drop Bracket. The "DB3" re-positions the rear control arms to operate within a corrected radius. This system drastically reduces the feel of bump-steer/axle steer on lifted Jeeps and provides the best control arm geometry available, period. This is only available from MetalCloak.

Check Out the Video>>>

Dividing Line
db3 vs long arm Green line shows DB3 and how it tucks behind wheel for optimal approach.

Redline shows a "typical" Long arm hang up MUCH farther forward increasing the chance for hang up.

The DB3 provides superior control arm angles for a better ride AND provides better approach angles over a rear long arm all in a simple bolt on application.
Dividing Line
"Only Available from MetalCloak"

MetalCloak's Patent Pending Rear Control Arm Correction Kit (metalcloakpatents.com). is the only solution to lift a Jeep JK Wrangler over 4.5 inches without cutting off the factory brackets and other costly modifications. This product adjust the roll center of your Jeep, and corrects the geometry of the control arms enabling the full use of up and down travel.

The entire bracket assembly is welded together for incredible strength, has built in approach skids, and all surfaces are angled to keep from catching on obstacles. Installs into factory locations - bolting securely in place.

Correction Bracket Features Include:
  • 7 Guage Steel
  • CAD Designed
  • Laser Cut
  • Fully Welded
  • Angled for Approach & Departurre
  • Trail-Tested Built-In Skid Plate

Rear Control Arm Drop Bracket on Jeep

Dividing Line

WHAT DOES IT DO?

Adding this system improves rear control arm geometry and adjusts rear axle caster for lifted JK Wranglers. The flatter the control arms are the better; the benefits are immediately felt with a smoother ride and stable handling as the roll center has been adjusted. Braking performance also improves maximizing safety along with the comfort and performance of your Jeep JK Wrangler.

Dividing Line
TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Customers who bought this were also interested in...
JK Front Track Bar JK Rear Track Bar JK Rear Track Bar Bracket

JK Adjustable Bump Stops

Dividing Line


Average Customer Review: 4.5 of 5 Total Reviews: 14 Write a review.

  0 of 0 people found the following review helpful:
 
Rear drop arm bracket November 9, 2018
Reviewer: Fernando Feliciano from Moca , Moca Puerto Rico  
Easy to install and feel better driving.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great job, fellas! September 27, 2018
Reviewer: James G. from Warner Robins, GA United States  
These things make driving feel great. Can't wait to get back on the trails to see what they'll do.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
It works August 28, 2018
Reviewer: Richard Haley from Keeling, VA United States  
If you are above 4", buy them !!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
DB3s work great May 6, 2018
Reviewer: Floyd Gaugh from Woodland Hills, CA United States  
Did both F&Rs and was easy install. Mine is an 09 so I didn't have to drill the 7/16" hole in the factory LCA mount. Just a lil heave ho with  a long drift pin and it all came together nicely. Ride is a lot smoother with the drop brackets. Don't even think I'll notice any clearance issues on the rocks either. Forklift flexed it and no issues there, going to moon rocks to see for real.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
If only I bought everything together! April 12, 2018
Reviewer: Hugh Belgarde from Chesterfield, MO United States  
Haven’t installed rear drop brackets because I have fixed length control and arms.  These brackets are very high quality, however more expensive than the fronts.  Shipping also hurts, but sales guy did cut me a break for buying front and rear.

Was this review helpful to you?

View All Customer Reviews