JK Wrangler HD Control Arm Pro'lignment Kit
JK Control Arm Drop Bracket Kit & Alignment Kit

Lifted your Jeep JK Wrangler but still using the factory control arms?

Although retaining factory control arms will not give you the added durability, adjustment or articulation of the Duroflex Control Arms, it is a great way to reduce the cost of lifting your JK. But, they need a little help.

MetalCloak's Control Arm Pro'lignment Kit reuses the factory control arms and corrects the caster for 2.5, 3.5, and 4.5" lift heights.

Note: This system comes in MetalCloak's Signature Gold Zinc.

: $149.00

Availability: Usually Ships in 1 to 2 Weeks
Product Code: 7073

Features Specifications & Materials Installation Instructions
Dividing Line


MetalCloak’s Control Arm Drop Bracket & Caster Correction Kit is the perfect solution for lifted Jeep JK Wranglers using factory control arms. This product enables the use of OE factory control arms without the need for problematic cam bolts. The entire bracket assembly is welded together for strength and then simply uses factory locations to bolt into place.

Dividing Line

Adding this Drop Bracket improves front control arm geometry and adjusts front axle caster for lifted JK Wranglers. The benefits are immediately felt with a smoother ride and superior braking performance with less front end dive. Maximize the comfort and performance of your Jeep JK Wrangler with MetalCloak’s Control Arm Drop Bracket/Castor Correction Kit.

Dividing Line

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Customers who bought this were also interested in...
JK Front Track Bar JK Rear Track Bar JK Rear Track Bar Bracket

JK Adjustable Bump Stops

Dividing Line

Average Customer Review: 5 of 5 Total Reviews: 18 Write a review.

  0 of 0 people found the following review helpful:
Don’t hesitate like I did July 2, 2018
Reviewer: Brad-Bros from Los Alamos, NM United States  
I upgraded my lift from maller to crawler, but I use it to drive to our Rocky Mtn hunting destinations all over the state. After going 4.5” lift it was hard to keep calm on the highway....
Put it on a trailer or buy these brackets... I bought and installed these and the DB3 rear brackets and they went on simple, well designed. And calmed this horrible sterring down to something tollerable
Thanks again Metalcloak

Was this review helpful to you?

  0 of 0 people found the following review helpful:
June 25, 2018
Reviewer: Tom Hudson from Portsmouth, NH United States  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
great upgrade May 6, 2018
Reviewer: Floyd Gaugh from Woodland Hills, CA United States  
Already had Cloaked CA's and Springs (4.5") and had quite a bit of squat off acceleration and dive when braking. I adjusted CA's to bring caster and pinion angles close to stock but this part works like magic! Only one small issue, I gave MC my billing address as my shipping address. They got right on it and re-Directed my parts the same day I called them. When the boxes arrived they looked a little disheveled. The hardware bag was opened and was missing a nut and three washers, but that may have been UPS as MC has always been top notch with everything else I have ever ordered!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Helped ride quality tremendously! April 12, 2018
Reviewer: Hugh Belgarde from Chesterfield, MO United States  
2008 Jeep jk 4dr, 6.0L Motech conversion, 5.5” Rubicon Springs.  Before ride was squirrely above 40 mph.  Now feels stable even at 75 mph!  LCA angle went from 13.5 degrees to 6.5 degrees!  Very happy!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Quality Brackets April 7, 2018
Reviewer: Michael Mikovich from Aurora, CO United States  
What a sturdy set of correction brackets!

Was this review helpful to you?

View All Customer Reviews