JK Wrangler Rear Bumper "Full Width" Tire Carrier, 72" BPC
JK Wrangler Rear Bumper Tire Carrier, 72"


 
The JK Jeep Wrangler Rear Bumper 72" "Full Width" Tire Carrier System, is a complete bumper system from MetalCloak that includes everything you need to mount our unique and rugged Tire Carrier system to your JK or JK Unlimited.

Fitting up to a 40" tire, the built-in deflection plate also acts as the lower support for your tire, preventing the back and forth bend that puts extra stress on your carrier.

Mounted to the bumper via Dual Billet Steel Plates and a high carbon steel shaft that works with Two Tapered Needle Roller Bearing for a smooth and shake free carrier.

Your JK Rear Bumper Tire Carrier includes
  • Adjustable Tire Carrier Swing Arm
  • 72" Stock "Full Width" Tire Carrier Caps
  • Extreme Duty Rear Bumper Base
  • Hardware for Mounting Spare
Recommended Accessories:

: $1,539.00

Availability: Usually Ships in 1 to 2 Weeks
Product Code: 3943-BPC

Features Specifications & Materials Installation Instructions
 

Dividing Line

JK 72" REAR BUMPER TIRE CARRIER SYSTEM

JK Wrangler Rear Bumper Tire Carrier System, 72"

  • Hot Rolled Steel 7GA Steel Plate
  • Options available for mounting Hi-Lift & Tools
  • Black Plated Grade-8 Hardware
  • RAW or Premium Black Texture Powder Coating
  • Fits JK & JK Unlimited
Shipment Includes:
  • Tire Carrier Arm
  • Extreme Bumper Base
  • 72" Crawler Tire Carrier Caps
  • Installation Hardware
  • MetalCloak Decals (2)
MetalCloak Rear Tire Carrier
MetalCloak Rear Tire Carrier

Fully Adjustable Tire Mount

  • 2" .120 Wall Steel Tube
  • 3/16" Steel Plates Fully Adjustable for Tire Size and Backspacing
  • Works with 5", 5 ", 6" bolt patterns
  • Tire Supported By Integrated Skid Plate
  • Fits up to 40" Tire (38" Max Recommended)

Rugged Door Latch

  • Hardened Steel Pin
  • Rubber Bump Stop and Dampeners
  • Built In Skid Plate Protects Latch
  • Easy to Open, Easy to Close


Dual Mount Tapered Roller Bearing

  • Upper and Lower Hold on Bearing
  • 3/4" Billet Steel Dual Supports
  • Dual Tapered Needle Roller Bearing Provide Smooth Swing Out
  • Smooth Swing Out, With no Up & Down Rocking
  • Spring Plunger Safety Pin
(62" Crawler Caps Show for Demonstration Purposes)
Dividing Line
PREMIUM BLACK TEXTURED POWDERCOAT
Our Premium Black Textured Powdercoat is the best in the industry. Check out our video on how we powdercoat.
Dividing Line
Customers who bought this were also interested in...
Universal Accessory Mount Rear License Plate Bracket & Light Hi Lift Mount

JK Frame Built Combo Bumper Base

OEM Clevite and Typical Flex Joint is the Duroflex Joint


Average Customer Review: 5 of 5 Total Reviews: 9 Write a review.

  0 of 0 people found the following review helpful:
 
High quality product October 25, 2018
Reviewer: Donald Dawson from Bellingham, WA United States  
Extremely fast shipping here in Washington state. Very impressed with the quality of the bumper and the tire carrier can't be beat. Looking to cloak out the rest of my JK before the spring.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Bumper October 18, 2018
Reviewer: Ted from Gloucester, VA  
Absolutely love the rear bumper/tire carrier. Works seamlessly with my GOBI rack. Quality product and tough as can be. Already backed over a few small trees on the trails and in the yard.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awesome bumper May 1, 2018
Reviewer: Larry Richards from Gresham, OR United States  
I researched a lot of different bumpers and usually go with Warn bumpers which I did on the front but the back bumper I wanted one that did not attach to the tailgate. What really drew me to metalcloak was the dual tapered bearing pivot point, solid latch on the other end with both ends having great support. Another bonus was the little shelf that the tire actually sits on to help support the weight of the tire. The locking device when the tire is swung completely open is nice to not have to worry about it closing on you when the Jeep is facing downhill. The only issue I have which would happen with any tire/bumper combo that is separate from the tailgate is when adding a backup camera is routine the wires and keeping them protected but a minor issue considering the overall quality and design of the bumper is worth every penny. It costs a little more but if your undecided about it whether or not it is worth the extra money all I can say is that I am glad I went for it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good Carrier February 8, 2018
Reviewer: Dallas from Henderson, NV United States  
I love how love this carrier sits. It opens easy and looks amazing!
Father and I installed together.  Definitely a two person job.  
Cons
I wish the alignment was better. I am sure there is a reason for this, but you must jack up the arm really high and then tighten the bolts really tight to get it to align with the weight of the tire.  I haven't tried putting any extra weight on it while its open with the tire yet.
I need to call and see if the locking mechanism can be adjusted to have it lock tighter. It doesn't rattle but it does bump around on the rubber so its slightly noticeable when going over bumps.  Have to see how it is off road and what adjustments I can make to tighten it up.
Over all a great bumper and I am satisfied.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Still the best January 21, 2018
Reviewer: Brad Schepman from Seymour, IN United States  
I have equipped a TJ in the past with metalcolak gear.  I am still impressed with the fit and finish of the products offered.  I couldn’t be more pleased.

Was this review helpful to you?

View All Customer Reviews