JK Wrangler Rear Bumper "Crawler" Tire Carrier, 62" BPC
JK Wrangler Rear Bumper Tire Carrier Swing Arm

The MetalCloak JK Jeep Wrangler Rear Bumper 62" "Crawler" Tire Carrier System, is a complete bumper system from MetalCloak that includes everything you need to mount our unique and rugged Tire Carrier system to your JK or JK Unlimited.

Fitting up to a 40" tire, the built-in deflection plate also acts as the lower support for your tire, preventing the back and forth bend that puts extra stress on your carrier.

Mounted to the bumper via Dual Billet Steel Plates and a high carbon steel shaft that works with Two Tapered Needle Roller Bearing for a smooth and shake free carrier.

Your JK Rear Bumper Tire Carrier System includes
  • Adjustable Tire Carrier Swing Arm
  • 62" Crawler Tire Carrier Caps
  • Extreme Duty Rear Bumper Base
  • Hardware for Mounting Spare
Recommended Accessories:

: $1,459.00

Availability: Usually Ships in 1 to 2 Weeks
Product Code: 3942-BPC

Features Specifications & Materials Installation Instructions

Dividing Line


JK Wrangler Rear Bumper Tire Carrier System, 62"

  • Hot Rolled Steel 7GA Steel Plate
  • Options available for mounting Hi-Lift & Tools
  • Black Plated Grade-8 Hardware
  • RAW or Premium Black Texture Powder Coating
  • Fits JK & JK Unlimited
Shipment Includes:
  • Tire Carrier Arm
  • Extreme Bumper Base
  • 62" Crawler Tire Carrier Caps
  • Installation Hardware
  • MetalCloak Decals (2)
MetalCloak Rear Tire Carrier
MetalCloak Rear Tire Carrier

Fully Adjustable Tire Mount

  • 2" .120 Wall Steel Tube
  • 3/16" Steel Plates Fully Adjustable for Tire Size and Backspacing
  • Works with 5", 5 ", 6" bolt patterns
  • Tire Supported By Integrated Skid Plate
  • Fits up to 40" Tire (38" Max Recommended)

Rugged Door Latch

  • Hardened Steel Pin
  • Rubber Bump Stop and Dampeners
  • Built In Skid Plate Protects Latch
  • Easy to Open, Easy to Close

Dual Mount Tapered Roller Bearing

  • Upper and Lower Hold on Bearing
  • 3/4" Billet Steel Dual Supports
  • Dual Tapered Needle Roller Bearing Provide Smooth Swing Out
  • Bearing Races Pressed in For Ease of Installation
  • Smooth Swing Out, With no Up & Down Rocking
  • Spring Plunger Safety Pin

Dividing Line

Our Premium Black Textured Powdercoat is the best in the industry. Check out our video on how we powdercoat.
Dividing Line
Customers who bought this were also interested in...
6in Arched Front Flare 8in Overline Front Flare 6in Arched Front Flare 6in Arched Front Flare

Dividing Line

Average Customer Review: 5 of 5 Total Reviews: 10 Write a review.

  0 of 0 people found the following review helpful:
Heavy duty rear bumper December 1, 2018
Reviewer: Christopher Foust from Bremerton, WA United States  
I first saw this bumper on Autoedit’s YouTube channel and instantly knew I wanted it for my own Jeep. It took about a week before it was shipped out and then another couple of days to get here in Washington. The instructions were pretty clear and YouTube videos made it easier to follow. My only problem with this product was the powder coat finish in the double bearing hold area of the swing gate caused the rod not to fit at first. I had to use some sand paper to create enough clearance. I’m very happy with the bumper and the overall quality. My 35” tire mounted right on and does not rattle.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Latch alignment on bumper/ tire carrier November 3, 2018
Reviewer: Daniel Stelma from Grandville, MI United States  
The latch would not align properly after adjusting all possibilities.  I had to grind the latch to get it to close entirely.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
ALL THE STARS! September 11, 2018
Reviewer: Eric Gillen from Tuolomme, CA United States  
After getting my lift and 37s I was left without a rear tire carrier and the stock bumper.  I was very tempted to just buy a cheaper set up, clean up the look of my Jeep and call it good.  But in the back of my mind I knew I would regret that in the long run.  So I decided to hold out and purchase this bumper and carrier and I couldn't be happier with that decision.  The fit, look, and function of this product is top notch the welds are perfect the powder coating flawless.  Shipping was very fast ordered on a Thursday delivered on Monday.  The install went pretty good and the directions where very clear especially when used with the YouTube video.  Thank you Metalcloak for continuing to exceed my expectations.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
JK Wrangler Rear Bumper "Crawler" Tire Carrier, 62 June 10, 2018
Reviewer: Robert Cravens from Rio Rancho, NM United States  
Great product, well made, love the bumper. Recommend purchaser use a 1/2" 13-pitch tap to clean threads of powder coating before installation -  caused me some frustration until I figured that out.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Easy Install & Great Quality December 27, 2017
Reviewer: Greg Sharp from Los Alamos, NM United States  
Excellent quality and didn't have to fiddle around with any annoying fitment issues on my 2011 JKU. Awesome bumper!

Was this review helpful to you?

View All Customer Reviews